User's Manual

- 33 -
Beep sound twice Æ Calibrate….. (5 dots) Æ Self Test….. (5 dots) Æ Initialize….. (5
dots) Æ Turn on the printer
4.2.3 Printer Initialization
Printer initialization is used to clear DRAM and restore printer settings to defaults.
Printer initialization is activated by the following procedures.
1. Turn off the printer power switch.
2. Hold on the FEED button ( ) then turn on the power switch ( ).
3. Release the power switch ( ) when “Error” LED color turn on red.
Note: In this moment, you should still hold on the FEED button.
4. The printer will beep sound twice later, then release the FEED button ( ) when the
LCD showing “Initialize…..”.
5. Printer will restore printer settings to defaults.
Note: Please refer to section 4.5 for printer defaults.
 The LCD will be changed as following figures:
Beep sound twice Æ Calibrate….. (5 dots) Æ Self Test….. (5 dots) Æ Initialize….. (5
dots) Æ Turn on the printer