User's Manual

- 39 -

5.4 Setting Wi-Fi by Diagnostic Tool (Option)

1. Connect the printer and computer with the cable.

Note:

* The printer connects with the computer via USB to USB cable or USB to RS-232 cable

(option).

2. Turn on the printer power switch.

3. Open Diagnostic tool and set interface. (The default setting is USB.)

USB to USB cable USB to RS-232 cable

The default interface setting is USB

interface. If USB interface is

connected with printer, no other

settings need to be changed in the

interface field.

4. Select “Wireless” tab and click on “Built-in wireless module” item.

5. Enter the new WLAN settings in the editor.

6. Press “Set” button to set the new settings to the printer.

7. The Wi-Fi LED will turn on blue (the Wi-Fi icon will be shown for LCD panel) if device

has been connected.

8. Print out the self-test page to confirm if it’s connected with right settings.

9. Remove the cable to print a data for test.