User's Manual

- 47 -
List Fonts
This feature is used to print current printer available fonts list to
the label. The fonts stored in the printer’s DRAM, Flash or
optional memory card.
N/A
List Images
This feature is used to print current printer available images list to
the label. The images stored in the printer’s DRAM, Flash or
optional memory card.
N/A
List Formats
This feature is used to print current printer available formats list to
the label. The formats stored in the printer’s DRAM, Flash or
optional memory card.
N/A
List Setup
This feature is used to print current printer configuration to the
label.
N/A
Control Prefix
This feature is used to set control prefix character.
N/A
Format Prefix
This feature is used to set format prefix character.
N/A
Delimiter Char
This feature is used to set delimiter character.
N/A
Media Power Up
This option is used to set the action of the media when you turn
on the printer.
Selections Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels,
determine length and feed label
Length Printer determine length and feed label
No Motion Printer will not move media
No
Motion
Head Close
This option is used to set the action of the media when you close
the print head.
Selections Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels,
determine length and feed label
Length Printer determine length and feed label
No Motion Printer will not move media
No
Motion
Label Top
This option is used to adjust print position vertically on the label.
The range is -120 to +120 dots.
0
Left Position
This option is used to adjust print position horizontally on the
label. The range is -9999 to +9999 dots.
+0000
Note: If printing from enclosed software/driver, the software/driver will send out the
commands, which will overwrite the settings set from the panel.