Tus neeg siv phau ntawv

ManualsBrandsTshav ntuj ManualsBattery SystemsSUNNY 360 Series Central Battery Systems

Central Battery Systems CCU 12V-250 To 470 And 24V-170 To 360 Series

DC. VOLTMETER

DC. CIRCUIT

DC. VOLTMETER

LED AC.

LED Full

LED Charge

Switch ON

Switch OFF

Switch TEST

Prevent battery short-circuits and overload.

Indicating the battery voltage.

Indicating input status.

Indicating fully charged status.

Indicating charger status.

To turn on the light (while the unit is not plugged in).

To turn oﬀ¬ the light (while the unit is not plugged in).

To test the unit availability (during normal circumstancel.

Figure

Indication

USER MANUAL

Speciﬁcation

1. Providing emergency lighting only when the power went out.

2. LED lamp or Halogen lamp with the DC power voltage of 12 volts or 24 volts.

3. The fully sealed “SUNNY” Sealed Lead Acid battery is totally maintenance-free

throughout its operational life.

4. Controlling charging with automatic solid-state system and constant voltage and

limit current with accuracy and eﬃciency.

5. Charging Time for 10-15 hours.

Central Battery Systems

Summary of content (4 pages)

PAGE 1
USER MANUAL Central Battery Systems CCU 12V-250 To 470 And 24V-170 To 360 Series 24 DC. VOLTMETER DC. VOLTMETER Central Battery Systems Figure C DC. CIRCUIT Prevent battery short-circuits and overload. DC. VOLTMETER Indicating the battery voltage. LED AC. Indicating input status. LED Full Indicating fully charged status. LED Charge Indicating charger status. Switch ON To turn on the light (while the unit is not plugged in).
PAGE 2
How to correctly connect the INPUT 220Vac. and OUTPUT 12Vdc, 24Vdc Installation and Operation 1. Check if the power socket is providing power before moving on to the next step. 2. Check that the load electrical wire is in good working order. If so, connect it to the Terminal Output and screw tightly to prevent any electrical sparks that could cause ﬁre. 3. connecting to load wiring to the output terminal inside the unit (check for any shortcircuits before connecting) 4. Set the DC.Circuit Breaker to ON.
PAGE 3
Important Note on Using the Unit 1. The unit should be installed indoors away from direct sunlight and rain or moisture. 2. The unit should be stored in temperatures under 25 Degree Celsius and the battery should be charged every 3 months to maintain its operational life. 3. Do not overload the unit with more power than it is designed for. 4. Check the power load before installing the unit. Initial Trouble Shooting Cause Problem - Power not getting to the unit - The power socket might not have any power.
PAGE 4
Terms for Warranty and Service 1. The product will only be under warranty if the customer ﬁlls in the “warranty card” and return the “return part” to the company within 7 days of purchasing the product. If this is not done within the speciﬁed time then the warranty will be considered void. 2. The warranty only covers the unit’s internal parts for the duration speciﬁed by the company counting from the date of purchase. 3.