® DRAPER 200 SERIES MULTI METERS 41817 & 41818 IMPORTANT: Plazas read these instructions carefully to ensure the dais and fictive use of this product and save these instructions for future forbearance.
1. TITLE PAGE 1.1 INTRODUCTION: USER MANUAL FOR: SERIES 200 MULTI METERS Stock no. 41817 & 41818. Part no. DMM200 & DMM201. 1.2 REVISIONS: Date published March 2017 First revision June 2017 Second rive February 2023 As our user manuals are continually updated, users should make sure that they use the very latest version. Downloads are available from: WEBSITE: draperiools.com PRODUCT HELPLINE: +44 (0) 23 8049 4344 GENERAL FAX: +44 (0) 23 8026 0784 1.
2. CONTENTS 2.1 CONTENTS Page content . 1 TITLE PAGE 11 INTRODUCTION 2 REVISION HISTORY 3 UNDERSTANDING THIS MANUAL COPYRIGHT NOTICE 2 INTENTS 21 CONTENTS 3 WARRANTY 31 4 INTRODUCTION 41 GENERAL SPECIFICATIONS . 43 HANDLING & STORAGE. 5 HEALTH & SAFETY INFORMATION §1 SAFETY PRECAUTIONS . 8 7 UNPACKING & CHECKING 71 PACKAGING 72 WHAT'S IN THE BOX? 8 OPERATING INSTRUCTIONS 81 DC VOLTAGE 82 AC VOLTAGE 83 DC CURRENT 87 DIODE TEST 88 CONTINUITY TEST 9 MAINTENANCE 9.
3. WARRANTY 3.1 WARRANTY Draper Tools products are carefully tested and Inspected before shipment and are guaranteed to be free from defective materials and workmanship. Should the tool develop a fault, rectum the complete tool to your nearest distributor or contact Draper Tools directly. Contact information can be found at the back of this manual. Proof of purchase must be provided.
4. INTRODUCTION 4.1 GENERAL SPECIFICATIONS Max Voltage between input terminal and Earth Ground: CAT III 600V. Over-range Indication: display “1” for the significant digit. Automatic display of negative polarity . Low Battery Indication: *4’ displayed Max LCD display: 1999 (31/2 digits). Fuse protection: {@5x20mm); (26x30mm). Power Supply: 9V battery, 6F22 or LEDA 1604. Operating Temp.: 0°C to 40°C (relative humidity Storage to 50°C (relative humidity Guaranteed precision Temp.
4. INTRODUCTION DC Current Range Accuracy Resolution 2mA of rdg + 10 digits) pA 20mA of rdg + 10 digits) 10pA 200mA of rdg + 20 digits) 100pA 10A (3.0% of rdg + 20 digits) 10mA Overload protection: F1 10A/500V fuse, F2 200mA/250V fuse Maximum Input current: 10A ( no more then 10 seconds) Resistance Range Accuracy Resolution 2000 of rdg +25 digits) 0.10 2kQ +0.8% of rdg +20 digits) 1Q 20k0 £0.6% of rdg +20 digits) 100 200k0 £0.
4. INTRODUCTION Continuity Test Range Function o) )) Built-in buzzer will sound if resistance is lower than 700 Over-load protection: DC 250V or AC 220V effective value Open circuit voltage: approximate 8.0V 4.2 HANDLING & STORAGE Care must still be taken when handling, dropping this machine will have an effect on the accuracy. The environment will have a negative result on its operation if you are not careful. If the air is damp, components will rust.
5. HEALTH & SAFETY INFORMATION 5.1 SAFETY PRECAUTIONS This instrument complies with IEC1010 (International Electronically Commission promulgated safety standards). Design and production with an over-voltage category {CAT II} and using the pollution level 2 safety requirements. /A\Warning To avoid electrical shock or personal injury. Please read the safety information and “warnings and precautions” before use. Warning: When measuring voltage above 30V, current above 10ma, AC power with an inductive load.
6. IDENTIFICATION 41818 Shown @ LCD display window. (® HFE Transistor test input socket. (@ HOLD button. (® Back light on and off button. @ Measurement function range switch. (@ Probe sockets.
7. UNPACKING & CHECKING 7.1 PACKAGING Carefully removes the product from the packaging and examine it for any sign of damage caused during shipping. Lay the contents out and check them. If any part is damaged or missing, do not attempt to use the tool and contact the Draper Helpline immediately (see back page for details) Retain the packaging material at least during the guarantee period: in case the machine needs to be resumed for repair.
8. OPERATING INSTRUCTIONS WARNING: DO NOT USE ON VOLTAGES ABOVE 600V. 8.1 DC VOLTAGE 1. Connect the black test lead to COM probe socket and the red to VOA probe socket. 2. Set the measurement function range switch to the desired V= range position. A Note: A) When the measurement is unknown always, set the highest position. 8.2 AC VOLTAGE 1. Connect the black test lead to COM probe socket and the red to VOA probe socket. 2. Set the measurement function range switch to the desired V~ position.
8. OPERATING INSTRUCTIONS 8.6 TRANSISTOR TESTING 1. Set the measurement function range switch to the ‘hFE’ position. 2. Determine whether the transistor under testing is NPN or PNP. Insert the leads into the correct holes of hFE socket on the front anal. 8.7 DIODE TEST 1. Connect the black test lead to COM probe socket and the red to VOA probe socket. 2. Set the measurement function range switch to J+ F position. A Nita: A) The meter will show approximate forward voltage drop of the doled. 8.
9. MAINTENANCE 9.1. BATTERY REPLACEMENT A WARNING! Before attempting to open the battery cover of the meter, be sure the test leads have been disconnected.
10. EXPLANATION OF SYMBOLS 10.1 EXPLANATION OF SYMBOLS WERE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish For indoor use. Do not expose io rain. Class II construction (Double insulated) European conformity UK Conformity Assessed Earth Back light ‘Gloaming Read instruction manuals before operating and servicing this equipment. Temperature Diode test hFE (Transistor testing) Low battery display Fuse Attention. High voltage / current! Danger.
11. DISPOSAL 11.1 DISPOSAL At the end of the machines working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. Contact your local authority for details of collection schemes in your area. In all circumstances: « Do not dispose of power tools with domestic waste. « Do not incinerate. « Do not abandon in the environment. « Do not dispose of WERE" as unsorted municipal waste. X — * Waste Electrical & Electronic Equipment.
CONTACT US Draper Tools Limited, Hurley Road, Chandler's Ford, Castlereagh, Hampshire. S053 1YF. UK. Delta International BV, Nude Graft 8, 6002 NL, Weer, Netherlands Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 Internet: www.drapertools.com E-mail: sales @drapertools.com General Inquiries: (023) 8026 6355 Service/Warranty Repair Agent: For after sales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area.
