清研讯科(北京)科技有限公司 http://www.social-distancing-contact-tracing.com/ Email:hello@tsingoal.
Table of Contents 1.Introduction 1 1.1.Product Description 1 1.2.Typical Applications 1 2. Panels 2 2.1.Front panel of the UWB Gateway 2 2.2.Rear panel of the UWB Gateway 3 3. Installation and power supply 4 3.1.Installation of UWB Gateway 4 3.2.Power supply 5 4. Internet connection of UWB Gateway 6 4.1Network connection 6 4.2.Network configuration 7 5. Data collection 8 6.Important handling information for UWB Gateway 8 7. Important handling information for UWB Gateway 10 8.
1.Introduction 2.Panels 1.1.Product Description 2.1.Front panel of the UWB Gateway U3000-t UWB Gateway is designed to collect data from UWB Tags when UWB tags Three LED indicators are on the front panel of U3000-t UWB Gateway to indicate are within 3m and stay for at least 1 second. The collecting process might affect its working status. the alarm and recording function of UWB Tag.
2.Panels 3.Installation and power supply 3.1.Installation of UWB Gateway 2.2.Rear panel of the UWB Gateway The rear panel of U3000-t UWB Gateway includes network connector, power supply connector, reset button and label. The U3000-t UWB Gateway is generally installed near the entrance, and the installation height is generally 2m. The installation method is as follows: CEILING CEILING Ceiling installation Suspension installation UWB gateway can only effectively cover a distance of 3~5m.
3.2.Power supply 4. Internet connection of UWB Gateway UWB Gateway has two power supply methods: PoE and DC . 4.1.Wired network Power over Ethernet Use Cat 5+ network cable to connect PoE switch(which meets There are two main connection methods between the UWB Gateway and the the 802.3af standards) and UWB Gateway. Note that the distance between PoE computer, as shown in Figures 4.1 and 4.2: switch and UWB Gateway should not exceed 80 meters.
4.2.Network configuration 5.Data Collection You need the “Social Distancing Contact Tracing Software”to configure the The main purpose of U3000-t UWB Gateway is to collect data from UWB Tags. It Gateway. Please refer to “Software Installation and Deployment Instructions takes about 1 second for each UWB Tag to upload its alarm records. The effective V1.1”for detailed configuration steps.
safety regulation requirements, or powering UWB Gateway when moisture is present, contains high levels of flammable chemicals, vapors, or particles (such as grain, can cause fire, electric shock, injury, or damage to UWB Gateway or other property. dust, or metal powders), may be hazardous.
.EU compliance 10.Disposal and recycling information for UWB Gateway Hereby declares that this wireless equipment is in compliance with Directive UWB Gateway disposal and recycling 2014/53/EU,2011/65/EU Your UWB Gateway should not be disposed of with household waste. Dispose of your UWB Gateway in accordance with local environmental laws and guidelines. European Union—Disposal Information 9.
how to use or product defects). The seller reserves the right to overhaul or replace "清研讯科"、"TSINGOAL"、"LocalSense" trademarks, logos, and trademark combinat (new products or newly overhauled replacement products) device or software. ions are registered trademarks of Tsingoal (Beijing) Technology Co., Ltd. This is the sole and exclusive remedy for any breach of the warranty terms. Please consult your local seller 's authorized seller when applying for warranty service.
13.RESPONSIBILITY STATEMENT 14.Appendix The product is an auxiliary tool, which cannot replace any safety management U3000-t UWB Gateway system, measure and rescue solution for hazardous operation or supervision system and measure for operation management. Please do not reduce safety Frequency 6.1GHz~6.9GHz awareness while using the product, and timely charge the product and check its Transmit power density ≤-41.