Spec Sheet

Page | 1 22
nd
July 2013 v1.1
Product Specification
1067 Low Frequency RFID Reader for Motorola MC70/75/75A
1067 Low Frequency RFID Reader
for Motorola MC70/75/75A
Dual LF Support at 125kHz / 134.2kHz
This snap-on accessory provides the Motorola™
MC70/75/75A terminal with Low Frequency (LF)
RFID functionality. The reader attaches as a
snap-on to the Motorola terminal and houses
both the RFID reader and the antenna.
The LF RFID reader provides the ability to read
and write to a wide variety of Low Frequency
transponders including ISO 11784, ISO 11785
and ISO 18000-2. Supported Manufacturer
specific transponders include NXP (Philips)
HITAG (1,2 and S), EM Microelectronic and Texas
Instruments.
All power for the reader is supplied by the
Motorola terminal, with the reader designed to
minimise current consumption and maximise
terminal run time.
The host terminal retains full bar code and
wireless LAN functionality
Flash upgradeability of the RFID reader
firmware provides future proofing of the
reader. The data output from the RFID reader
may be simply incorporated into a Pocket PC
application using the Software Development
Kit (SDK).
The Reader is available individually or as an
Explorer kit containing the reader, sample
RFID tags and a Software Development Kit
(which includes a demonstration application,
the source code for that application and full
API documentation)
Features:
Low Frequency RFID reading &
writing
Supports reading and writing
(when supported by the
transponder) to Low Frequency
RFID tags, including those
compatible with industry
standards ISO 11784, ISO 11785
and ISO 18000-2
Compatibility
The reader remains compatible
with existing MC70/75/75A
accessories such as the single slot
cradle and car charger
Connectivity
USB and MC70/75/75A charge
connections are brought through
to the base of the LF RFID reader
to allow charging and ActiveSync
over USB with the Reader
attached
Applications
 Logistics
 Authentication
 Animal Tagging
 Time and Attendance
Snap-on LF RFID Reader