User Manual

Scanned the

corresponding

code

successfully

Both units :

normal constantly changing

status display-readouts

with a “Di” sound

Baby unit Parent unit

with a “Di” sound

Parent unit:

Scanned the

corresponding

code

unsuccessfully

Baby unit:

Remarks: If operated by the supplied adaptor, please first plug in the adaptor, then

power on the unit. And then scan the corresponding code with the LINK key if need.

C. 2-Way Communication

Usually, the detected sound is transmitted from the Baby unit to Parents unit. But Parents

unit can talk to Baby unit with its TALK key.

1. Press and hold TALK key of Parents unit and talk to the Baby unit.

2. Release the TALK key, the Parents unit is in receiving status and wait for signal from

Baby unit.

Remarks:

When pressing TALK key, the Parents unit does not receive any sound from Baby unit.

D. Music Control(optional)

After activating Music Play function of both units, as long as one of them adjusts music

play or changes music(01-06 or AL), the setting for this function of the other unit will

change accordingly.

Trouble shooting

Problems Solutions

1. No power - Unit is turned off.

- Check if the batteries are installed properly.

- Make sure the adaptor is connected to the Unit properly if using

the adaptor instead of batteries.

- The Unit may be in low battery status, change new batteries.

still Orange light

Red/ Green light

still

lashing

still

lashing