User Manual

5
AC Adaptor:
The AC Adaptors are low voltage power source that allow you to
use your household electricity to run the Baby Monitor.
Connect the AC Adaptors to the AC Adaptor Jack in the Unit.
Both plug into any standard volt electrical outlet in your home.
It is recommended to turn off the units before plug in or unplug
the adaptors.
CAUTION: These adaptors were made with a specific design for
this product. They cannot be used with any other appliance. Never use a different type of
adaptor with this Baby Monitor.
Privacy Protection
Always remember that you are using public airwaves when you use the Wireless 2.4GHz
Digital Baby Monitor. Sound may be broadcasted to other receiving devices.
Conversations, even from rooms near the Baby unit, may be broadcast as well.
CAUTION: To protect your privacy, always turn the system off when not in use. It is
possible that the Parents unit may be interfered from other devices in the 2.4GHz
frequency range. To minimize this potential problem, more than 65000 ID code have been
provided for your use. If you experience interference while using one ID code setting,
simply select to another ID code.
Battery Installation
Please charge the rechargeable batteries before first time usage.
1. Ensure the unit is off. Press the button on the belt clip and rotate it
clockwise or counterclockwise for 90º.
2. Open the battery compartment door.
3. Insert 3 * AAA batteries into the Baby unit and Parents unit according to
the +/- signs shown in the battery compartment, respectively.
4. Replace battery compartment door. Press and rotate the belt clip to its
normal position.
Battery Tips:
z If the product is not in use for a long time, disconnect both units from
the household electrical outlet. And remove the batteries or the
exhausted batteries from the units, otherwise battery leakage and corrosion can
damage them.
z Dispose the batteries safely.
z Non-rechargeable battery is not to be recharged.
z Rechargeable batteries are only to be charged under adult supervision.
button
90º