User Manual

Fully charged

(Unit is turned off.)

Red light

The battery icon is full and stops

flashing.

Note:

z User can also install 3 alkaline AAA batteries instead of the supplied re-chargeable

batteries.

z Or directly operated by the supplied adaptors.

Help protect the environment

Batteries with symbols shown opposite must not be disposed in general domestic waste.

Instead, take them to a collecting point for old batteries or special waste products(as your

local authority for details) or return them to the dealer you bought them from. They will

ensure batteries are disposed safely.

Testing Before First Time Usage

A. Test the Baby unit transmission and the Parents unit reception.

1. Place Baby unit and Parents unit in room where you intend to use it.

2. Set both Baby unit and Parents unit to the corresponding code by pressing the LINK

key at the bottom of the units for different ID code to ensure privacy.

There are more than 65000 ID codes user selection.

3. Then:

-- The LCD displays standby status.(LCD version)

-- The power indicator lights and the power is on.(LED Indicator version)

NOTE:

For the first time usage, turn on both units, they can automatically scan the

corresponding code at once without press any key. If reset the corresponding code for

both units, user has to press the LINK key.

B. Baby unit emission:

1. Place Baby unit in room where you intend to use it.

2. Push the SENSITIVITY switch to a desired position to turn on the Baby unit

transmission.

3. As soon as the Baby unit transmits a signal, then:

LCD version LED Indicator version

Green light