User Manual

Constantly changing display-readouts

4. The transmitter is standby status when no signal is transmitted.

LCD version LED Indicator version

C. Parents unit reception:

1. Place Parents unit in room where you intend to use it.

2. Slide the VOLUME switch to a desired position and the unit is ready for reception.

3. If the unit receives a signal,

LCD version LED Indicator version

Constantly changing display-readouts

4. The receiver is standby status when no signal is received.

LCD version LED Indicator version

When you experience interference (buzzing or static, etc.), reset both units to another

corresponding code. ( details please refer to P.11 – scan the corresponding code for the

units )

IMPORTANT! Test sound reception before use and whenever location of Baby unit is

changed. (Refer to Testing Before First Time Usage)

Note:

* Position the Baby unit at least 1 meter away from the baby so that the microphone can

pick up the child's sound.

* Unwrap and fully extend power cord for best transmission if adaptor is used. Plug the

adaptor into the nearest standard household electrical outlet.

Operations Procedures

A. Power On / Off

1. Connect the Parents unit with the AC adaptor. Plug it into the nearby standard electrical

outlet or insert 3 AAA alkaline batteries.

2. Turn on at the right side upward of the unit, a click sound to be heard indicates

the unit is turned on.

3. Turn downward, a click sound indicates the unit is off.

Green light

Flashin

Green li

Flashing Green light