Sense Digital Baby Monitor WIRELESS 2.4GHz DIGITAL BABY MONITOR USER MANUAL Congratulations You have just purchased a qualified Wireless 2.4GHz Digital Baby Monitor. Please read this instruction carefully before using the product. Keep these instructions for future reference. Parts and Quick Reference AC Adaptor (for Parent Unit) AC Adaptor (for Baby Unit) Baby Unit Color Parent Unit Baby Unit: 1. Antenna 2. Night Vision Infrared LED’s 3. Microphone 4. Camera 5. Camera Rotation Handle 6.
1. Antenna 2. Power Indicator 3. Speaker 4. Control Key(e/f / Menu key) 5. LCD Display 6. Sound Level Sensitivity Meter 7. AC Adaptor Jack 8. On/Off Switch 9. VOX Switch 10. Link Key AC Adaptor: The AC Adaptor is device that allows you to power on the system with your household electricity. The adaptor can be separately connected to DC IN connectors of Parent Unit and Baby Unit. Please be reminded to switch off the system before plugging or unplugging the adaptors.
Privacy Protection Always remember that you are using public airwaves when you use the Wireless 2.4GHz Digital Baby Monitor. Sound and video may be broadcasted to other receiving devices. Conversations, even from rooms near the camera, may be broadcast as well. CAUTION: To protect your privacy, always turn the system off when not in use. It is possible that the Parent Unit may be interfered from other devices in the 2.4GHz frequency range.
Color Index of Power Indicator Light Indicator Indication Parent unit Baby unit Normal Operation Green light Low battery Flashing red light(and refer to the below form) In charging (Power Off) Red light In charging(Power On) Orange light Scanning N/A the N/A Flashing green light corresponding channel Battery Status Low battery status Power Indicator Alert Parent unit Flashing red light after 30 sec. Di Di sound every 3 sec for 30 sec. Baby unit Flashing red light for 30 sec.
3 Adjust the appropriate volume level. Remark: Switch on the night vision when using in the dark, infra-red LED will be activated, and only Black & White image will be shown. * For more detailed operation, please go to P.5 “Functions setup” Reception Testing Before using the Parent Unit or changing the location of the system, it is very important to test the video and sound reception: To test the video reception 1. Place the Baby Unit in the most appropriate location. (e.g.
B. Baby Monitor Functions Setup B1. Parent Unit Screen 1. Signal 2. Zoom-in 3. Alarm On 4. Night Vision 5. Parent unit Battery 6. Baby unit Battery 7. Clock Time 8. Baby live video 1. Mode 2. Night Vision B2. Main Menu 3. Camera 4. Settings 5. Info 6. Exit Press MENU key to open main menu. Use e/ f key to choose the options. B3.
2. Night Vision When the function is turned on, the Infra-red LED will be activated. Parents can still monitor their baby in dark environment. Under night vision function, exposure is not available for use. 1> Enter Night Vision menu. 2> Select to turn on or off the function. 3> Confirm and return Main Menu. Remarks: An icon should be shown on the status bar when turning on the Night Vision function. 3. Camera 1> Enter Camera menu.
Full Screen : no a status bar on the top of the screen, the visual area will become large. Enter Camera menu to select Full OR Window Screen option to turn into Full OR Window Screen mode. Mirror Image User can monitor the Left-and-right inversion image for the monitored object with this function. 1> Enter Camera menu and select Mirror option. 2> Confirm and enter Mirror menu. 3> Select to turn on or off the function. 4> Confirm and return the live video.
1> Select Exposure option, then confirm and enter Exposure menu. 2> Press e/ f key to minus/add the brightness level from 01 to 05, you can see the demonstration of different brightness level. 3> Confirm and return Settings menu OR wait for about 10 seconds to return to the live video. Remarks: 01 – the darkest ; 05 – the brightest; Under Night vision function, exposure is not available for use. 4.2 Quality 1> Select Quality option. 2> Confirm and enter Quality menu.
2> Select Alarm on to turn on the alarm function. 3> Confirm and enter Alarm Setting menu. 4> Same as the clock setting. The Alarm icon should be shown on the status bar when turning on the alarm function. When the clock time shown on the LCD screen is the same as time of alarm setting, alarm alert sound will be played about 30 sec every 30 sec within 10 minutes. 5> Select Alarm Off in the Alarm menu to turn off Alarm function.
sound is detected by Baby unit. LCD screen would be turned off if no sound is detected by baby unit within 1 minute. Once the sound is detected, it will automatically turn on the LCD screen. This is also power saving feature. C2. Out of Range Alert When the connection between both units is broken (e.g. Baby unit is turned off; OR the units are detected out of communication range (beyond 150m) OR Baby unit is in low power), the out of range alert will be activated.
Trouble Shooting Problem Power indicator LED does not light up No image or sound Image flickers Audio feedback (squealing) Dark image at Night Lose Link (No signal) Possible Cause Solution - Unit is not turned on. - Slide the ON/OFF switch to the “ON” position - Power is switched off - Make sure that power outlet is turned on. - Batteries may be used up - Replace new batteries - AC Adaptor not properly connected. - Check AC Adaptor jack-to-socket and plug-to-outlet connections.
- The units are detected out of communication range - Baby unit is in low power. - Ensure both units are in the communication range. - Replace new batteries or operated by the supplied adaptor. Technical Specification Parent Unit 1. operation voltage: DC 6V 650mA or 3 x “AA” alkaline battery or 3 x the special rechargeable battery(Tsuen shing, BT-100-AA) 2. Temperature Range : 0℃～50℃ 3. Power consumption : ≤4W 4. Operation Frequency : 2.4GHz～2.4835GHz 5.
3> Confirm and return the Night Vision menu. [ Use e/ f key to select , MENU key to confirm ] 2. Melody Function There was lullaby function for baby sleeping. Baby unit can play 6 songs melody for baby. This function can be selected by Parent unit. Parent can select Melody 1, Melody 2, ……, Melody 6, Melody All, Melody off for baby. If selected the Melody function, the Settings menu in the Parent unit shows the below: 1> Select Melody option. then confirm and enter Melody menu.
more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
