User Manual

10
2> Select Alarm on to turn on the alarm function.
3> Confirm and enter Alarm Setting menu.
4> Same as the clock setting.
The Alarm icon should be shown on the status bar when turning on the alarm function.
When the clock time shown on the LCD screen is the same as time of alarm setting, alarm alert
sound will be played about 30 sec every 30 sec within 10 minutes.
5> Select Alarm Off in the Alarm menu to turn off Alarm function.
Remark: The alarm time should be reset after changing battery or unplugging the adaptor if
operated by adaptor without battery only.
4.6 Video Timeout
User can set five timeout duration for Normal mode: 30sec./60sec./90sec./120sec./No limit. Longer
times will reduce battery life faster. When setting the timeout duration, Parent unit can only listen to
Baby unit voice. If users do not want to turn off the video in the normal mode, just select no timeout
here.
1> Select Video Timeout option, then confirm and enter Video Timeout menu.
2> Select your desired timeout duration.
3> Confirm and enter Settings menu OR wait for about 10 seconds to return to
the live video.
Remark: When setting VOX ON and activating the video time off function, once the sound is
detected, it will automatically turn on the LCD screen.
5. Info
User can enter the Info page and view the current setting of the baby monitor.
1> Select Info option.
2> Confirm and view the current setting.
Info included: Mode /Night Vision /Exposure /Quality /Volume /Alarm /Video
Timeout /Firmware
6. Signal strength
It shows the strength of the transmission signal of the transmit unit. The
distance between transmit and receive unit will be short when signal is weak.
C. Other functions
C1. VOX
When turning on VOX in normal mode, transmission will be activated ONLY if