User's Manual

Only the batteries of the same and equivalent type as recommended in the “Battery Installation”
instructions are to be used.
Parents & Baby Unit Battery Changing
1. Use only the AC adaptors which are included in the package, Plug into any nearby
standard household electrical outlet.
2. And connect them with the units.
3. It takes 8 hours to charge the re-chargeable batteries full at the first time.
Note:
- User can also install 3 alkaline AAA batteries instead of the supplied re-chargeable batteries;
- Or directly operated by the supplied adaptor.
- The power indicator will turn off when the power is out or in low battery. In this case, user
needs to re-charge the supplied re-chargeable batteries or change for new alkaline AAA
batteries.
Testing Before First Time Usage
Test the Baby Unit transmission and the Parents Unit reception.
- Set both Parents and Baby Units to the same channel (1 or 2) by switching the channel switch.
- Place Baby Unit in room where you intend to use it. Push the SESITIVITY switch to Norm
position to turn on the Baby Unit transmission. The power indicator lights. Please refer to
Color Index of Power Indicator.)
- Place Parents Unit in room where you intend to use it. Rotate Volume dial to turn power on.
The power indicator lights. Please refer to Color Index of Power Indicator.)
- Light of sound level indicator lights when sound is received:
 One or two dots light for shallow sounds received.
 Three or more dots light for louder sounds received.
- When you experience interference (buzzing or static, etc.), switch both units to the alternative
channel.
Color Index of Power Indicator
Red Green Amber
AC Adaptor Operated
(Units are On)
Yes
AC Adaptor Operated
(Unit are Off)
Ye s
Battery Operated (High
Battery Level)
Ye s
Battery Operated (Low
Battery Level)
No Light