User's Manual

ManualsBrandsTsuen Shing Enterprises ManualsBaby Monitors2.4GHz Baby Monitor

WIRELESS 2.4GHz HANDHELD BABY MONITOR

BM-242 USER MANUAL

Congratulations

Giving birth to baby is the happiest experience for parents. They would offer their children

the best living quality as they can and take care of them whole-heartedly. Therefore, a baby

monitor is a necessary baby care product that helps parents pay attention to every wonderful

moment of their baby.

We have developed a 2.4G & 4 channels handheld slim size baby monitor that eliminates the

interference from crowded 900MHz band. A color LCD screen allows the parents to watch

their child. In addition, parents are able to see their baby in bright black & white view of

baby even in a darkened room.

If you want to see a bigger image of the baby on TV, a TV cable is included to help you.

First time parents may find it difficult to manage the feeding time of their baby, a digital

alarm clock is incorporated to remind the parents, “It’s time to feed the baby!”

Please read all instructions thoroughly before using your Baby Monitor.

Content and Features

AC Adaptor:

The AC Adaptors are low voltage power sources that allow you to use your household

electricity to run the Baby Monitor. Connect the Ac Adaptors to the AC Adaptor Jack in the

Parents and Baby Units. Both plug into any standard volt electrical outlet in your home. It

is recommended to turn off the units before plug in or unplug the adaptors.

CAUTION: These adaptors were made with a specific design for this product. They cannot

be used with any other appliance. Never use a different type of adaptor with this monitor.

Colour Monitor Power Indicator

Indicator’s Statues Indication

Flashing Red Light Batteries are charging

Green Light Power is good

Flashing Green Light Low power

Summary of content (11 pages)

PAGE 1
WIRELESS 2.4GHz HANDHELD BABY MONITOR BM-242 USER MANUAL Congratulations Giving birth to baby is the happiest experience for parents. They would offer their children the best living quality as they can and take care of them whole-heartedly. Therefore, a baby monitor is a necessary baby care product that helps parents pay attention to every wonderful moment of their baby. We have developed a 2.4G & 4 channels handheld slim size baby monitor that eliminates the interference from crowded 900MHz band.
PAGE 2
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO WATER OR MOISTURE. NEVER ATTEMPT TO OPEN THE CASE OF EITHER THE BABY OR PARENTS UNIT. THIS IS DANGEROUS. 1. This product is not to be used as a medical monitor and its use should not replace proper adult supervision. It is important that an adult stays within the viewing range of the Baby Monitor at all time during use. 2. Always keep the Baby & Parents Units and AC adaptors out of child’s reach.
PAGE 3
. Do not drop the product or physically damage it, otherwise electronic components may be affected by such abuse. Caution: 1. Always remember that you are using public airwaves when you use the Baby Monitor. Sound and video may be broadcasted other receiving devices. Conversations, even from rooms near the Baby Unit may be broadcasted as well. To protect your privacy, always turn the Baby Unit off when not in use. 2.
PAGE 4
To test sound reception quality 8. Stay in the room with the Baby Unit, speak in both a whisper and a normal conversation level from where the child is being monitored. During sound testing, keep in mind the sound level of your child and test accordingly. 9. Keep the Baby Unit far enough away from the Parents Unit to prevent feedback noise. Place the Baby Unit in a different room than the Parents Unit is sufficient.
PAGE 5
1. 2. 3. 4. - Do not submerge any part of the Baby Monitor in water. - Remove and dispose empty batteries promptly. Do not mix old and new batteries. Rechargeable batteries are only to be charged under adult supervision. Non-rechargeable battery is not to be recharged. - DO NOT short circuit supplied terminals Insert batteries as indicated inside the battery compartment The supplied rechargeable batteries cannot be used in other devices.
PAGE 6
Baby Unit 1. 2. 3. 4. Connect the Baby Unit with the supplied 9V AC adaptor. Plug it into the nearest standard electrical outlet at home. Turn on the unit by switching the ON/OFF switch to ON position. The power indicator lights up in green. Switch Channel Switch to set both units to the same channel until you receive the correct picture and clear voice on the Parents Unit. Adjust the focus by turning the camera lens clockwise or anti-clockwise until you see a clear picture on the monitor.
PAGE 7
3. Press ▲ or ▼ to adjust the picture’s contrast from 1 to 8 levels. Level 8 is the highest 4. level. To confirm the setting, press “FUN” or leave the unit alone for 5 seconds to return to its normal operation. B. 1. 2. 3. Channel Setting Press ▲ /▼ until you see “CH” Press “FUN” to enter the channel selection mode. Press ▲ or ▼ to select a channel. 4. Repeat step 3 until you hear a clear sound and receive a clear image on the Parents Unit, then press “FUN” to confirm the setting.
PAGE 8
2. Turn on the TV, set it to the video viewing channel; user could see the image captured by Baby Unit on TV screen now.
PAGE 9
Troubleshooting Problem Possible Cause Solution Baby Unit power Baby Unit is not turned - Slide the ON/OFF switch to the ON indicator does not ON position. light - Make sure house fuses and circuit breakers are on. - Make sure that any switch that controls the power flow to the wall outlet is on AC adaptor not properly - Check AC adaptor jack-to-socket and connected plug-to-outlet connections. Parents Unit does not Power is turned off.
PAGE 10
Dark picture at night Power is turned off - Check the Baby and/or Parents Units’ power indicator. - Check the connection of the adaptors and the Parents and/or Baby Units. Batteries may be dead - Replace batteries or recharge the supplied rechargeable batteries Technical Specification I. Handheld Parents Unit 1. Handheld operation voltage: DC6V or 3 x “AA” Supplied Rechargeable / Alkaline Battery 2. Low-voltage indication: ≤3.4V 3. Temperature range: 0˚ C ~ 50˚ C 4. 5. 6. 7. Power consumption: 3.
PAGE 11
FCC Statement Warning: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.