User Manual

11
Troubleshooting of FRS
Problem Solution
No Po wer Reposition or replace batteries
Message Not Transmitted Make sure the Push-to-Talk button is
completely pressed as you transmit.
Reposition or replace batteries.
Message Not Received Confirm radios have the same Channel and
Interference Eliminator Code settings.
Make sure Push-to-Talk is not inadvertently
being pressed.
Reposition or replace batteries
Obstructions, operating indoors or in vehicles
may interfere with communication. Change
your location.
Check to make sure volume is enough to hear.
Hearing Other Conversation Confirm Interference Eliminator Code is set,
or Noise on a Channel (active settings are 1-38).
Shared Channel or Interference Eliminator
Code may be in use, try another.
Limited Talk Range Steel/concrete structures, heavy foliage and use
Use in buildings and in vehicles will decrease range,
check for clear line of sight to improve transmission.
Wearing radio close to body such as in a pocket or on
a belt will decrease range, change location of radio.
Heavy Static or interference Radios too close. Radios must be at least 5 feet apart,
increase your distance.
Radios too far apart. Obstacles interfere with transmission.
Talk range is up to 2 miles in clear, unobstructed conditions.
Troubleshooting of FM
Problem Solution
The sound is unclear and has cacophony. To check if the frequency what the LCD display is the same
frequency which corresponding the radio station, enter into the
frequency setup, used UP/DOWN to modulate the frequency.
Not is local broadcasting station, the signal is weakly,