User Manual

2
Installing Batteries
1. Rotate the belt clip anti-clockwise
2. Open the battery door
3. Install the batteries according to the anode-cathode signs shown
in the battery compartment
4. Close the battery door and rotate the belt clip clockwise.
Note: please use 4”AAA” batteries
QUICK GUIDE
1. When the unit is ready
A – Open the unit install the batteries & press the MODE key for 1
sec., then you can hear a “DI”, it means the unit is ready.
B -- Unlock If the unit has been locked (Refer to Figure 1) press
the MODE key first, then press the UP key in 1 sec. After
that the lock will be unlocked, and a “DI, DI” sound will be
heard (Refer to Figure 3).
2. How to talk with your friend
A. You must make sure the unit is on the FRS status (As Figure 3),
if the unit is on FM radio status please press the FM key to
change it on the FRS status.
B. Select the same channel & sub-code as that of your friend’s,
e.g. CH 8, SUBCODE 22)
B1-In figure 3, press the UP key to enter the Figure 4
B2-Press the MODE key to enter figure 5
B3-Press the UP/DOWN key to select the channel from 1 to 14.
In this case, you need to choose channel 8
B4-Press the MODE key to confirm the setting & return the
main menu (Figure 3)
B5-In the figure 3, press the UP/DOWN key to enter figure 6
B6-Press the MODE key to enter figure 7
B7-Press the UP/DOWN key to select the sub-code from 0-38.
In this case, you need to choose subcode 22.
B8-Press the MODE key to confirm the setting and return the
main menu (Figure 3)
C. Press the CALL or PTT key to connect the other side
--Press the CALL key once to make a call ring tone or
press the PTT key as long as you would like to talk to
the other user. If the device is in the transmitting status,
(Figure 3)
(Figure 4)
(Figure 5)
(Figure 6)
(Figure 7)
(Figure 8)
(Figure 9)