User Manual

3
“T” would be displayed on the LCD. (Refer to Figure
8).
D. Release the CALL or PTT key to receive the signal from the
other user.
--Release the CALL/PTT key and wait for signal, Refer to Figure 9,
if “R” is displayed, it means that the device is in the receiving
status. You can hear the call ring tone or the talk from the other
user.
3. How to hear the FM station
A. Press the FM key to change you unit status is in FM radio
station. (as Figure 10)
B. To select the FM radio station (e.g. FM 102.6 MHz)
B1—In the figure 10, press the UP key to enter the figure 11
B2—Press the MODE key to enter the figure 12
B3—Press the UP/DOWN key to change the FM radio station
that you like. (e.g. 87.5-108.0 MHz)
B4—Press the MODE key to confirm the setting & return the
main
FM screen figure10
C. To adjust the suitable volume
C1—In the figure 10 press the UP/DOWN key to enter the
figure 13
C2—Press the MODE key to enter the figure 14
C3—Press the UP/DOWN key to adjust the volume until you
are satisfied.
C4—Press the MODE key to confirm the setting and return the
main screen figure 10.
 Figure 10
(Figure 11)
(Figure 12)
(Figure 13)
(Figure 14)