User Manual

Functions Setup

Setup the FRS Function

------To make sure your unit is in FRS status first, (Figure 15) if

the unit is in FM radio status, please press the FM key to return

the FRS status then setting the below functions.

A----Changing Channels

A1---In figure 15, press the UP key to enter figure 16

A2---Press the MODE key to enter figure 17

A3---Press the UP/DOWN key to change the channel

 1-14 ,it’ll change the channel number sequentially from 1

to 8 or the other way round if pressing time over 1

second .

A4---Press the MODE key to confirm the setting and return the

main screen.

B----Changing Subcodes

B1--- In figure 15, press the UP/DOWN key to enter the figure

18.

B2---Press the MODE key to enter figure 19

B3--- Press the UP/DOWN key, it will change the subcodes

sequentially from 1 to 38 or the other way round, if

pressing time is over 1 sec.

B4--- Press MODE key to confirm the setting and return the

main screen.

C----To Adjust the Suitable Volume

C1---In figure 15, press the UP /DOWN key to enter the figure

C2---Press the MODE key to enter figure 21.

C3---In figure 21, press the UP/DOWN key to change the

VOL level, it’ll change the VOL continually if you press the

UP/DOWN key more than 1 second.

C4—Press the MODE key to confirm the setting and return the

main screen.

(Figure 15)

(Figure 16)

(Figure 17)

(Figure 18)

(Figure 19)

 Figure 20



Figure 21

