User Manual

5
D----Changing SQ
D1---In figure 15, press the UP/ DOWN key to enter figure 22.
D2---Then press the MODE key to enter its figure 23
D3---Press the UP/DOWN key to change the SQ level, it’ll
change the SQ continually if you press the UP/DOWN key
more than 1 second.
D4---Then press the MODE key again to confirm the setting and
return the main screen.
E----Open/Close the VOX & Modulation Sensitivity
Ea----Open the VOX
Ea1---In figure 15, press the UP/DOWN key to enter figure 24.
Ea2---Press the MODE key to enter figure 25
Ea3---Press the UP/DOWN key to move the arrow on the
selectable item “on”.
Ea4---Press the MODE key to confirm the VOX has been
opened, and returned to the main VOX screen figure 26.
Eb---Off the VOX
Eb1---In figure 15, press the UP/DOWN key to enter figure
24.
Eb2---Press the MODE key to enter its figure 27
(after the VOX has been opened)
Eb3---Press the UP/DOWN key to move the arrow on the
selectable item “off”.
Eb4---Press the MODE key to close the VOX and return the
main screen.
Ec ---Changing the VOX Sensitivity
Ec1---In figure 25 or 27, press the UP/DOWN key to move the
arrow on the “ ”
Ec2---Press the MODE key to enter figure 28.
Ec3---Press the UP /DOWN key to change the sensitivity of
VOX it will change the VOX continually if you press the
UP/DOWN key more than 1 second.
Ec4---Press the MODE key to confirm it is in the main screen.
 Figure 22
(Figure 23)
 Figure 24
 Figure 25
 Figure 26
(Figure 27)
(Figure 28)