User Manual
7
2 Setup the FM Radio Function
------ To make sure your unit is in the FM radio status first, (Figure
37)
if the unit is in FRS status, please press the FM KEY to return
the FM radio status then setting the below functions.
A----To Select the FM Radio Station
A1---In figure 37, press the UP/DOWN key to enter figure 38
A2---Press the MODE key to enter figure 39
A3---Press the UP/DOWN key to change the FM radio station in your
preferred direction.
A4---Press the MODE key to confirm the setting & return the main
FM radio screen figure 37.
B Auto-scan of the FM Station
B1---In figure 37, press the UP/DOWN key to enter figure 38
B2---Press the MODE key to enter figure 39
B3---In figure 39, press the UP/DOWN key 1sec. the radio
station will auto-scan up or down, LCD would change to figure
40 while scanning is taking place.
B4---The radio station is changing automatically, when it
finds a station frequency will stay there for10 seconds, press
the MODE key to confirm choosing the frequency, and
auto-scan would be finished. Otherwise,
it will scan
repeatedly after 10 seconds unless you switch off the auto-scan.
C
To adjust the Suitable Volume
C1---In figure 37, press the UP/DOWN key to enter figure 41
C2---Press the MODE key to enter figure 41
C3—Press the UP/DOWN key to adjust the volume until you are
satisfied.
C4—Press the MODE key to confirm the setting and return the main
screen.
D Select to return to the FRS Status
D1---In the figure 37, press the UP/DOWN key to enter the figure 43
D2---Press the MODE key to enter the figure 44
D3---Press the UP/DOWN key to select “Auto” or “Manu”
D4---Press the MODE key to confirm
(Auto---means when the unit receive a signal from the other user, it
will switch to the FRS status from FM radio status automatically.
(Manu---means when the unit receive from the other user, it will
inform you first, then you can decide to stay in FM Radio Status or
to go to FRS Status)
Figure 37
(Figure 38)
(Figure 39)
Figure 40
(Figure 41)
Figure 42
Figure 43
Figure 44