Use and Care Manual

Tsurumi’s Operation, Service, and Repair Manual
Maintenance
32
4-2 Changing Engine Oil
(1) Drain the oil while the engine is still warm to assure rapid and complete draining.
(2) Remove the oil filler dipstick/cap and drain plug.
(3) Allow oil to drain from the engine (Figure 4-1).
(4) Refill with the recommended oil (Figure 3-6). Check the oil level. Install the oil filler dipstick /
(5) Install the drain plug and tighten securely.
NOTE: Engine oil capacity: 1.1 liters (1.16 U.S. Quart)
(6) Refill with the recommended oil (Figure 3-4). Check the oil level. Install the oil filler dipstick /
cap (Figure 4-2).
Figure 4-1: Draining Engine Oil Figure 4-2: Checking Oil Level
4-3 Air Cleaner Service
WARNING: NEVER USE GASOLINE OR LOW FLASH POINT SOLVENTS FOR CLEANING THE
AIR CLEANER ELEMENT. A FIRE OR EXPLOSION COULD RESULT.
(1) A dirty air cleaner will restrict airflow to the carburetor. To prevent carburetor malfunction,
service the air cleaner regularly. Service more frequently when operating the engine in
extremely dusty areas.’
NOTE: Never run the engine without the air cleaner. Rapid engine wear will result from
contaminants, such as dust and dirt, being drawn through the carburetor into the engine.
TPG4 FIG 4-1
TPG4 FIG 4-2