Use and Care Manual

Tsurumi’s Operation, Service, and Repair Manual
Removal/Installation
71
Figure 6-14: Front Panel and Control Box Components
(Model TPG3-7000HDXE Shown)
2. DC Fuse (TPG3-7000HDXE)
(1) Refer to Figure 6-14. Remove front panel (46) and control box (45) (refer to
Removal/Installation of Front Panel and Control Box).
(2) Remove fuse from its fuse holder.
(3) Align notch in panel with the key on the switch. Install replacement switch (59) in back side
of front panel (46).
(4) Install fiber washer and ring nut. Tighten ring nut.
(5) Connect switch with mating connector.
3. Engine Switch (Models TPG3-3000HDX, TPG3-4500HDX and TPG3-6000HDX)
(1) Refer to Figure 6-14. Remove front panel (46) and control box (45) (refer to
Removal/Installation of Front Panel and Control Box).
(2) Disconnect wiring.
(3) Connect wiring and install replacement switch (59) in back of front panel (46).
58
76
45
60 (2X)
75
52
48
61 (2X)
49
61
61
57
61 (2X)
66
46
59
53
55
62
63
62
74
62
50
67
TPG3 FIG 6-14
68
69
70
71
72
73
56
64
54
61
65
47
61
51
51
77
78
79
80
81