Datasheet

Model PSxxM / PSxxL
November 9, 2009
page 1 of 5
Slide Potentiometer
Molded Element
100,000 Cycle Life
Metal or Plastic Shaft Options
With/Without LED Illumination
With/Without Dust Cover
RoHS Compliant
MODEL STYLE
Dual Gang Without LED PSxxM
Single Gang With LED PSxxL
ELECTRICAL
1
Resistance Range, Ohms 500 -1M
Standard Resistance Tolerance
± 20%
Resistance Tapers A,B,C
Residual Resistance Terminals 1 to 2:Less than 10 ohms
Terminals 2 to 3:Less than 30 ohms
Input Voltage, Maximum Linear B taper: 200 Vac Other tapers: 150 Vac
Power rating, Watts (Single Unit / Dual Unit)
Linear B taper: 20mm: 0.1W / 0.05W, 30mm: 0.2W / 0.1W
45mm: 0.25W / 0.125W, 60mm:0.2W / 0.2W
Other tapers: 20mm: 0.05W / 0.025W, 30mm: 0.1W / 0.05W
45mm: 0.125W / 0.06W, 60mm:0.1W / 0.1W
Dielectric Strength 300Vac, 1 minute
Insulation Resistance, Minimum 10M ohms at 250Vdc/ 1 minute
Sliding Noise Less than 100mV
Gang Error ±3dB (-40dB to 0dB)
MECHANICAL
Static Stop Strength, Minimum 5.0 Kgf/cm
Operating Force 10gf to 100gf
Detent Slip-out force 30gf to 200gf
DURABILITY
Sliding Life 100,000 cycles
1
Specifications subject to change without notice.

Summary of content (5 pages)