User's Manual

10/13
selected, the radio that is receiving the signal displays the Caller ID number of
the transmitting radio.
9) Weather alert setting
To set the Weather alert receiving mode
* Press the
MODE
button until the [
AL on
or
oF
] blinks
* Press the up[
″
]button or down [
…
]button to set the alert function.
* While the alert is ON,
weather icon
will blink both in FRS and weather
mode.
*
Weather icon
will stop the blinking on the LCD when the alert is OFF.
** While the unit is GMRS/FRS mode, if the alert signal is received, the unit
will set to Weather Radio mode automatically and warning beep tone will
generate.
** While the unit is in Weather mode, if the alert signal is received, the unit
will generate the warning beep tone.
10) Call Ringer Selection Mode
This feature Provides 3 user selectable call ringer signal.
To set your favorite call ringer signal.
* Press the MODE button until the [
C
01
or up to
03
] appears on the LCD.
* Press the up[
″
]or down[
…
] button to select the call melody type.
* Press the PTT button to confirm.
* To activate the call, click the “
PTT
” button twice quickly.
11) Transmitting
* Press and hold the PTT button (The LED light red during transmission.)
* Speak slowly and clearly
* To Stop the transmission, release the PTT button.
* if there are no more receiving signal for 5 seconds, the unit will go into
power save mode.
12) Receiving
The Coding feature reduces the possibility of interference and provide
enhanced Communication. You can only listen to a call that has correct
matching code.
** Upon receiving a signal, the LED lights green. When radio is on CTCSS mode
and then a signal that has different CTCSS code on the same channel is received,
the LED blinks in green.
Important :
Before transmitting or receiving to the other parties
* Correct channel is selected (1 to 15) and
* Correct code is set ( 00 to 38 )