User's Manual

9/13
the LCD.
* DW icon will appear on the LCD.
To set the dual watch(DW) channel
* Press the up[
″
]or down[
…
] button to choose the channel.
“
oF
” means no DW mode.
“
01
up to
15
” means the channel that is dual-watched.
* Press the PTT button or MODE button to confirm.
5) Roger tone
This feature will give the tone signal to other parties when transmitting finished
(when PTT button is released.)
To activate or disable the Roger tone
* Press the Mode button until [
rb on
or
oF
] and the
roger
icon blink on the
LCD.
* Press the up[
″
]or down[
…
] button.
* Press the PTT button or MODE button to confirm.
6) Beep tone
To set the beep tone
* Press the Mode button until [
bP on
or
oF
] and the
BELL
icon blink on the
LCD.
* Press the up[
″
]or down[
…
] button.
* Press the PTT button or MODE button to confirm.
7) Setting Out of Range
To set the Out of Range
* Press the Mode button until [
ir on
or
oF
] and the
Out of Range
icon blink
on the LCD.
* Press the up[
″
]or down[
…
] button.
* Press the PTT button or MODE button to confirm.
8) Setting ID code
To set the Caller ID
!
Press the MODE button until the ID Icon and small segment display blinks.
!
Then press the Up or Down button to select the desired ID number from 01
to 10. “
oF
” means no ID mode.
!
Press the PTT button or Mode button momentarily to confirm the ID
number.
** When a signal is received from the radio where the one Caller ID is