User's Manual

12/16
( Ex : noisy road, motor bike, factory etc. )
To Set the VOX mode
* Press the MODE button until the [
Uo
oF
Or
XX
] appears.
XX
is a vox level
*
VOX
icon will be appeared on the LCD.
To Set the VOX level
* Press the up[
″
]or down[
…
] button to set the VOX level from 1 to 5.
“
oF
” is disable the VOX function.
“
01
” is least sensitive.
“
05
” is most sensitive.
* Press the PTT button or MODE button to confirm.
4) Setting the DW (dual watch)
To set the DW mode
* Press the MODE button until the [
oF of 01
up to
15
] and
DW
icon blink on
the LCD.
* DW icon will appear on the LCD.
To set the dual watch(DW) channel
* Press the up[
″
]or down[
…
] button to choose the channel.
“
oF
” means no DW mode.
“
01
up to
15
” means the channel that is dual-watched.
* Press the PTT button or MODE button to confirm.
5) Roger tone
This feature will give the tone signal to other parties when transmitting finished
(when PTT button is released.)
To activate or disable the Roger tone
* Press the Mode button until [
rb on
or
oF
] and the
roger
icon blink on the
LCD.
* Press the up[
″
]or down[
…
] button.
* Press the PTT button or MODE button to confirm.
6) Beep tone
To set the beep tone
* Press the Mode button until [
bP on
or
oF
] and the
BELL
icon blink on the
LCD.
* Press the up[
″
]or down[
…
] button.
* Press the PTT button or MODE button to confirm.
7) Setting Out of Range