User's Manual

9) Weather alert setting
To set the Weather alert receiving mode
* Press the
MODE
button until the [
AL on
or
oF
] blinks
* Press the up[ù]button or down [ü]button to set the alert function.
* While the alert is ON, weather icon will blink both in FRS and weather
mode.
* Weather icon will stop the blinking on the LCD when the alert is OFF.
** While the unit is FRS mode, if the alert signal is received, the unit will set to
Weather Radio mode automatically and warning beep tone will generate.
** While the unit is in Weather mode, if the alert signal is received, the unit will
generate the warning beep tone.
10) Call Ringer Selection Mode
This feature Provides 3 user selectable call ringer signal.
To set your favorite call ringer signal.
* Press the MODE button until the [C 01 or up to 03] appears on the LCD.
* Press the up[ù]button or down [ü]button to select the call melody type.
* Press the PTT button to confirm.
* To activate the call, click the “PTT” button twice quickly.
11) Transmitting
* Press and hold the PTT button (The LED on the right lights red during
transmission.)
* Speak slowly and clearly
* To Stop the transmission, release the PTT button.
* if there are no more receiving signal for 5 seconds, the unit will go into
power save mode.
12) Receiving
The Coding feature reduce the possibility of interference and provide enhanced
Communication. You can only listen to a call that has correct matching code.
** Upon receiving a signal, the LED lights green. When radio is on CTCSS
mode and then a signal that has different CTCSS code on the same channel is
received, the LED blinks in green.
Important :
Before transmitting or receiving to the other parties
* Correct channel is selected (1 to 22) and