User's Manual

9/14
!
VOX
icon will be appeared on the LCD.
To set the VOX level
!
Press the up[
″
]or down[
…
] button to set the VOX level from 1 to 5.
“
oF
” is disable the VOX function.
“
01
” is least sensitive.
“
05
” is most sensitive.
!
Press the PTT button or MODE button to confirm.
4) Setting the DW (dual watch)
To set the DW mode
!
Press the MODE button until the [
oF of 01
up to
15
] and
DW
icon blink
on the LCD.
!
DW icon will appear on the LCD.
To set the dual watch(DW) channel
!
Press the up[
″
]or down[
…
] button to choose the channel.
“
oF
” means no DW mode.
“
01
up to
15
” means the channel is dual-watched.
!
Press the PTT button or MODE button to confirm.
5) Power Selection Mode
This feature permits selection of the transmitting power level to high or low.
Using low power, the unit will have a lower transmit range but battery life will
Be increased.
To access the transmitter power selection function
!
Press the MODE button until the Po icon appears with a flashing Hi or Lo
indication on the display.
!
Press the Up or Down button to toggle between the Hi or Lo selections.
!
Press the PTT button momentarily to confirm selection.
6)Roger tone
This feature will give the tone signal to other parties when transmitting is
finished
(when PTT button is released.)
To activate or disable the Roger tone
!
Press the Mode button until [
rb On
or
oF
] and the
roger
icon blink on the
LCD.
! Πρεσσ τηε υπ[″]ορ δοων[…] βυττον.
!
Press the PTT button or MODE button to confirm.