Wireless Microscope Instruction Manual
CONTENTS BEFORE USE 4 Button menu 14 Important information 4 System settings menu 15 Care and maintenance 4 Deleting an item 16 Warning 4 Product description 5 INSTALLING COMPUTER SOFTWARE 18 Computer requirements 5 Software installation 18 PRODUCT AT A GLANCE 7 USING “XPLOVIEW” 19 Package contents 7 Button menu 19 Product overview 7 Full screen viewing 20 Product specification 8 Image rotation / flip 21 System settings menu 22 GETTING STARTED 9 Charging 9 Assembl
BEFORE USE Product description Important information This wireless microscope features a 640 x 480 CMOS sensor and can be paired with up to 2 Wi-Fi enabled devices within a 10m range. It is compatible with Android, IOS, Windows and Mac OS devices. Please read this instruction manual carefully before using this product, and retain this instruction for future reference. Simply connect the device to the wireless microscope's WLAN access point to start viewing, capturing and recording live images.
Windows Compatible operating systems Windows 8 (32 bit or 64 bit) Windows 7 (32 bit or 64 bit) Windows Vista (32 bit or 64 bit) Windows XP SP2, SP3 CPU Speed P4-1.8GHz or above RAM 512 MB or above Hard disk 800 MB or above WLAN Wi-Fi 802.11 b/g/n PRODUCT AT A GLANCE Package contents Wireless microscope Installation CD Adaptor User manual Mac OS Compatible operating systems Mac OS X 10.4.8 - Mac OS X 10.10.
Product specification GETTING STARTED Connection type 802.11 b/g/n Effective magnifications (on a 17” monitor) 41x Effective viewing area 8 x 6 mm Illumination Four LEDs Sensor CMOS Size Weight Charging 70 x 85 mm 170 grams Charge the wireless microscope before using it. Connect the wireless microscope to a computer with the USB cable provided. Status Charging Charged Indication light colour Red Green Assembling the product Insert the adaptor into the adaptor slot.
Capturing Fasten the adaptor by turning it gently in the clockwise direction. Press the image capture button to capture an image. Turning on the device Turning off the device Press and hold the power button for 2 seconds. Press and hold the power button for 2 seconds to turn off the device. Focusing Adjust the focus of the image manually by rotating the focusing ring.
手持设备的使用 开机 点击 "Connect" 确认连接 . 打开显微镜 ( 详情请参考第 10 页 ) 打开 WIFI 点击手持设备的 "Settings" 图标 . 连接成功 . 将 "WIFI" 打开 . 打开 APP 连接 xploview 点击 "xploview" 图标 .
INSTALLING THE SMARTPHONE APP Search for and connect to “xploview_xxxxxx” under the list of available devices. (”xxxxxx” is a 6 digit code unique to your device.) Search for “xploview” on Play Store or App Store on your mobile device and install the app. USING THE WIRELESS MICROSCOPE WITH A SMARTPHONE The default password of the device is 12345678. Open the xploview app Connecting the device Turn on the wireless microscope (see P.10). Go to “Settings”.
Button Menu System Settings Menu The icons on the button menu: Enter Image / Video playback mode Set image directory Picture playback Video playback Capture on screen image Enter Video mode Set size limit for video files (in MB) Toggle to turn off wireless microscope upon app exit Restore the wireless microscope to factory status Display settings Information about the app Start video recording Pause video recording End video recording Open System Settings Menu (see system settings menu on page 15)
Deleting an item Android: Press and hold an item for 2 seconds. IOS: Swipe the item to the left. Tab “Delete” to confirm. Tab “OK” to confirm.
INSTALLING THE COMPUTER SOFTWARE USING “XPLOVIEW” Software installation Button menu Windows The icons on the button menu : Insert the supplied application CD to the CD-ROM of the computer. Double click the "xploview.exe" icon < > located on the driver CD. Follow the xploview setup wizard to install the application software for the wireless microscope. Open System Settings Menu (see system settings menu on page22). Capture on screen image.
Connecting the device Mac OS 点击 "system settings menu" 按钮 . 在 "Device" 选项中选择 "xploview Wireless", 然后点击 "Connect" 按钮 , 再点击 "Apply". Windows 在 "Device" 选项中选择 "xploview Wireless", 然后点击 "Disconnect" 按钮 , 再点击 "Apply".
Full screen viewing Image rotation / flip To activate the full screen mode, click the full screen button < > located on the bottom right corner of the xploview application software window. Click < > to rotate or preview screen. To exit full screen mode, either double click on the screen, or press the "Esc" button on the keyboard.
System Settings Menu Device setup The first time the xploview software is started, the default settings will be loaded, you may change these settings manually in the system settings menu. If the image captured by the wireless microscope was not displayed by default, you can change this by selecting it from the "Device" drop-down menu. Windows Timed Shot setup The frequency and duration of automatic images capture can be adjusted under this option.
Save setting Windows The default location for captured images or videos can be changed under this option. Language setting The language of the xploview software can be changed under this option. Mac OS Advanced settings By clicking the "More..." button on the right of the system settings menu, you will be able to manually adjust all of the image settings. Note that the settings available may be different, depending on your operating system.
Saved files With the xploview application software opened, you can locate the saved files folder by clicking the "More..." button located on the left of the main software window. Uninstalling the xploview software Windows Select "Uninstall xploview" from the start menu (Start > All Programs > xploview > Uninstall xploview). Mac OS Drag the xploview application icon from the "Applications" folder to "Trash".
RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. FCC compliance statement (United States only) This device complies with part 15 of the FCC Rules.
