User's Manual
Table Of Contents
- Front Cover
- Contents
- List of Figures
- List of Tables
- List of Code Listings
- Legal Disclaimer
- Regulatory Information
- Typographic Conventions
- Important Notice
- Hardware Setup
- 1 Introduction
- 2 Overview of the TTE-Switch Lab Space
- 3 Functional Description
- 4 Getting Started
- 5 State Machine
- 6 Configuring the TTE-Switch Lab Space
- 7 Diagnosis
- 8 Troubleshooting
- Appendix A Default Configuration
- Appendix B MIBs
- Glossary
- Bibliography
- Index
2. OVERVIEW OF THE TTE-SWITCH LAB SPACE
2 Overview of the TTE-Switch Lab Space
Figure 1: The TTE-Switch Lab Space
2.1 Identification
Each TTE-Switch Lab Space has a label at its rear that provides the following information:
Figure 2: Product identification label
• Product Name: TTE-Switch Lab Space
• PNR: Part Number
• SER: Serial Number
• DOM: Date of Manufacturing
• MFR: Manufacturer
• A data matrix with the product serial number on the bot-
tom right.
2.2 External Interfaces
Figure 3: Front view of the TTE-Switch Lab Space
1. Reset
2. 4 status LEDs on the front panel (Power/Status/Error/Sync)
3. GPIO
4. RS-422 serial interface (can be used for debugging and maintenance)
5. SpaceWire (can be used for debugging and maintenance)
6. 19 x 100 Mbit/s full-duplex Ethernet ports (100Base-TX via RJ45)
© TTTech Computertechnik AG 2019. All rights reserved.
Confidential and Proprietary Information
13
Document Number:
D-863-M-05-001