User's Manual

Table Of Contents

2. OVERVIEW OF THE TTE-SWITCH LAB SPACE

2.3.2 ARINC 664p7 Implementation

• Policing, filtering, and switching engine for bandwidth control and traffic prioritization

• Integrity and error checking of frames

• 4096 virtual links with up to 8 priorities, with restrictions of their associated ports

• 4096 BAGs

• BAGs freely configurable from 0.5 ms to 1600 ms

• BAG configuration granularity of 100 µs

• Jitter and BAG resolution of 8 µs

• Support for ICMP (ping), SNMPv1 and TFTP dataloading

• Configuration data can be programmed through TFTP

NOTE

Additional packaging material and additionally packed accessories, e.g. a mains power cord, may be part

of the delivered product but are not considered to be part of the system in this document.

2.4 Physical Specifications

• 19-inch rack housing: 1 height unit

• Size: 346 mm x 483 mm x 44 mm

2.5 Power Supply

• AC voltage: 100-240 V, 50 to 60 Hz

2.6 Environmental Operating Ranges

• Operating temperature: 0 °C to +60 °C

• Storage temperature: -55 °Cto +85 °C

2.7 Standards Compliance

• ARINC Specification 664P7-1: The switch is fully compliant to ARINC 664 part 7 (deterministic

Ethernet networking) [1].

• IEEE 802.3™-2005 (switching, flow control) [4].

• IEEE 802.1Q™-2011 [3].

• IEEE 1588-2008 [5]: The switch supports the IEEE 1588 end-to-end transparent clock mode. The

clock of the switch is not synchronized to the IEEE 1588 Master Clock.

• SAE AS 6802 [6]: The switch supports the SAE AS 6802 network synchronization and start-up

mechanism (fault-tolerant TTEthernet clock synchronization protocol).

Confidential and Proprietary Information

Document Number:

D-863-M-05-001