User's Manual
Table Of Contents
- Front Cover
- Contents
- List of Figures
- List of Tables
- List of Code Listings
- Legal Disclaimer
- Regulatory Information
- Typographic Conventions
- Important Notice
- Hardware Setup
- 1 Introduction
- 2 Overview of the TTE-Switch Lab Space
- 3 Functional Description
- 4 Getting Started
- 5 State Machine
- 6 Configuring the TTE-Switch Lab Space
- 7 Diagnosis
- 8 Troubleshooting
- Appendix A Default Configuration
- Appendix B MIBs
- Glossary
- Bibliography
- Index
7. DIAGNOSIS
7 Diagnosis
Management Information Database
The Management Information Database (MIB) describes the managed objects that can be retrieved via
SNMP Version 1 (SNMPv1) on UDP port 161. Make sure to use the correct IP address according to
your loaded configuration. The default configuration has the IP address 10.10.10.10 (see Section B on
page 39).
In your preferred SNMP client, make sure to choose SNMPv1 and disable all other versions of the SNMP
protocol. The MIB files listed below can be loaded into any SNMPv1-compliant SNMP client. The MIB
files contain the following diagnostic information about the switch status:
• TT_MIB-TTE-SWE (see Section B.2 on page 39)
Contains all relevant status information and error counters of the switch engine.
• TT-MIB-TTE-ES (see Section B.3 on page 47)
Contains all relevant status information and error counters of the switch-internal end system. For
more detailed information about the switch-internal end system (see the Pegasus End System Inter-
face Control Document [7]).
© TTTech Computertechnik AG 2019. All rights reserved.
Confidential and Proprietary Information
36
Document Number:
D-863-M-05-001