Owner manual

LYDKRAFT ApS
Mose Allé 20, DK2610 Rødovre
Denmark
2
CONTROLS:
LOW FREQUENCY
SECTION:
The low frequency section consists of a
BOOST
and
ATTEN
uate
control and a
LOW FREQUENCY
switch located just below.
BOOST:
The
B
OOST
control is continuously vari
able from 0 dB to +14 dB.
It is of
the shelving type.
ATTEN:
The
ATTEN
uate control is continuously variable from 0 dB to
-
18 dB.
It is of the shelving type.
LOW
FREQUENCY:
The
LOW FREQUENCY
switch determi
nes at which frequency the
maximum boosting and attenuation is obtained.
There is a choice of 4 frequencies:
20, 30, 60 and 100 Hz.
HIGH FREQUENCY
SECTION:
The high frequency section consists of two separate circuits:
1.
A high fre
quency boost section, which contains a
BOOST
control, a
BANDWIDTH
control and a
HIGH FRE
QUENCY
switch.
2.
A high frequency attenuate sec
tion, which consists of a
ATTEN
uate
control and a
ATTEN SELECT
switch.
BOOST SECTION:
BAN
DWIDTH:
The
BANDWIDTH
control is continuous
ly variable from
SHARP
to
BROAD
.
It controls the width of the high fre
quency boost curve.
(030507)