Datsheet

SPECIFICATIONS for TUBE- TECH SMC 2B/M
Impedance
X-over frequencies
Input 2 kOhm Low & Mid band 60,100,150,200,250,300 Hz
Output < 60 Ohm 0.24, 0.4, 0.6, 0.8 1, 1,2 kHz
Mid & High band 1.2, 2, 3.2, 4, 6 kHz
Frequency response @ -3dB 5 Hz to 50 kHz
Compressor
Distortion THD+N @ 40Hz Ratio: 1,5:1 to 10:1
0 dBU 0,15 % Threshold off to -20 dBU
+10 dBU 0,15 % Attack 3 ms to 200 ms
Max. output: +26 dBU <1 % Release: 60 ms to 2 s
Max. input: +21 dBU <1 %
Tubes
Noise Rg=200 Ohm ECC 81 4 pc
Gain @ 0 dB +10 dB ECC 82 2 pc
22 Hz-22 kHz < -75 dBU < -65 dBU ECC 83 2 pc
CCIR-468-4 < -65 dBU < -55 dBU
Dimensions
Cross talk @ 10 kHz: < - 40 dB Height: 3 units 132 mm 5,2”
Width: 483 mm 19,0”
CMMR @ 10 kHz: < - 60 dB Depth: 205 mm 8,1”
Gain: Weight
Master Off to +10 dB Net: 6,2 kg 12,7 lbs
Low-, Mid-, High band Off to +10 dB Shipping: 7,5 kg 16,5 lbs
Tracking between channels
< 0,5 dB
Power requirements
Gain –Master Version (1 dB steps @ 115 V/230 V, 50-60 Hz 35-50 W
Master -1 to +10 dB
Low-, Mid-, High band -1 to +10 dB
Tracking between channels
< 0,1 dB
Notes
X-over frequencies x1 X4 All specifications @ RL = 600 Ohm
Low & Mid band 60 to 300 Hz 0,24 to 1,2 kHz Lydkraft reserves the right to alter
Mid & High band 1,2 to 6 kHz specifications without prior notice