Installation & Assembly

Pet Table Assembly Instructions

Your pet table comes packaged in one box.

Parts List

1 x Top Panel

2 x Side Panel

1 x Back Panel

1 x Inside Door Panel

1 x Outside Door Panel

1 x Apron

1 x Stretcher

1 x Bottom Panel

1 x Seat Cushion

Assembly

Step 1

Hardware List

8 x Long Bolts

M6 x 60mm

8 x Wood Dowel

M8 x 30mm

4 x Short Bolts

M6 x 25mm

1 x Large Bolt

M8 x 35mm

1 x Hex Key

M4 x 60mm

Step 2

4 x Floor Protector

x 2

Replaceable Parts

DO NOT use any sharp objects to open plastic wrapped components

as damage to product or components may result.

Carefully remove all of the components from the packaging and

set aside for assembly. Assemble on a soft surface to prevent

scratching the finish.

PAGE 1
Pet Table Assembly Instructions Your pet table comes packaged in one box. DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching the finish.
PAGE 2
Assembly Step 4 Step 3 G K K N N FF Step 5 Step 6 J x8 D E D Step 7 Step 8 N L B E x2
PAGE 3
Assembly Step 9 x4 Step 10 P O K x4 N Step 11 H Step 12 * Lock * I M x1 Close the doors to align the bolt holes. Insert the (M) bolt and turn clockwise to hand tighten the doors together. Step 14 Step 13 * Lock * * Unlock * Turn (M) bolt counter clockwise until the door can be opened. Do not fully remove the bolt. It is highly recommended to use coasters or mats beneath hot pans, plates, and glassware to protect the surfaces and finish of your furniture.