Assembly Instructions

KEY:
PT = Playtop
L = Left panels
B = Back panel
R = Right panels
F = Front panel
SG = Seed Guards
cage assembly instructions
Select Cage
cage: 24"L × 20"W × 60"H
interior: 23½"L × 19½"W × 34¾"H
wire gauge: 9 & 12
wire spacing: ¾"
getting started!
READ THESE NOTES FIRST:
• Enlist A Friend: While this large cage may be assembled by
one person, several steps would be made easier with two people.
Review these instructions thoroughly before attempting to assemble
cage.
parts
6
a
PLAYTOP UNIT for METALIC COLOR MODELS:
Attach two ladders to back edge of playtop with
one short hex screw for each.
Attach cup/perch bar to ladders with one short
hex screw at the top of each ladder.
Attach two ladders to front edge of playtop and
front edge of cup/perch bar.
Slide shortest (21¾"L) perch onto cup/perch bar.
Insert short cups into holders on cup/perch bar.
6
b
PLAYTOP UNIT for HAMMERTONE COLOR MODELS:
U-bar ships as two pieces. Assemble U-bar and
attach to back edge of playtop frame with two long
hex screws.
Attach cup/perch bar to U-bar with two short hex
screws.
Slide shortest (21¾"L) perch onto cup/perch bar.
Insert short cups into holders on cup/perch bar.
Install ladder. Top posts on ladder correspond with
holes on face of cup/perch bar. Bottom posts corre-
spond with holes on front top edge of playtop frame.
7THIS STAGE IS EASIER WITH TWO PEOPLE.
Left and right side seed guards (SG1) are
interchangable. (SG1) guards have tabs at the
corners which fit into sleeves on the legs of
front/back (F)/(B) panels. Slip guards into place.
Front seed guard (SG2) panel has a notch at
the center of the front base edge. Slide (SG2)
guard into place. With first person holding
(SG2) guard in position, second person aligns
holes at the corners and secures guards
together with screw & nut pairs. Use same
procedure with back seed guard (SG3).
✩
Your cage is now fully assembled!
LEFT SIDE
FRONT
BACK
RIGHT SIDE
GRILLE
PLAYTOP
DRAWER
PLAYTOP
(metalic models)
PLAYTOP
(hammertone models)
SEED GUARDS
TRAY
L2
L1
R2
R1
PT2
G
T
PT1
F
B
{4} stainless steel cups
(short cups for Playtop)
{ 2 } wood dowel perches
(short dowel for Playtop)
{ 1 } grille safe-clip
{ 2 } cup holders
{ 8 } short hex head
screw & nut pairs for
seed guard
{ 6 } long hex screws
{ 12 } short hex screws
{ 4 } rolling casters
{ 1 } allen wrench
SG3
SG2
SG1SG1
Made in China
SG1
SG1
SG2
SG3
OR
• Count Hardware: Extra screws are included. If the screw
count is short, please contact Customer Service.
• Tools: An allen wrench is included. You may want to have
a pair of needle nose pliers available. You may use your own
handtools, but we
DO NOT recommend power drills! Parts
can be
over-tightened and damaged/stripped. We are not
responsiblefor this type of damage.
• Review All Parts: If parts are bent during shipping,
pieces may be straightened with needle nose pliers. For seriously
damaged pieces, please contact Customer Service.