Instructions / Assembly

TR1 Pipe Connections:

* SDR 35 - 4"

* Sch. 40 2" & 3"

* Corrugated - 4"

TR1 Drain Exits:

* Bottom - Knock-outs

* Side - (with optional TR1-D4)

1- Remove end cap (2 end caps are

Included with each TR1)

2 - Attach TR1-D4

(Sold Separately)

TR1 has 1 "male" end & 1 "female" end.

Multiple TR1's can be joined "male" to "female"

-OR-

Gender Changers can be used to connect multiple TR1's

"male" to "male" & "female" to "female"

TR1-D4

End Drain

(Sold Separately)

MF-4

Corrugated Pipe

Connector

(Sold Separately)

TR1 36" TRENCH DRAIN:

COMPONENTS & ASSEMBLY

Gender Changers: GCF & GCM

(See page 2 for more details)

PAGE 1
TR1 36" TRENCH DRAIN: COMPONENTS & ASSEMBLY TR1 Pipe Connections: * SDR 35 - 4" * Sch. 40 2" & 3" * Corrugated - 4" TR1 Drain Exits: * Bottom - Knock-outs * Side - (with optional TR1-D4) 1- Remove end cap (2 end caps are Included with each TR1) 2 - Attach TR1-D4 (Sold Separately) TR1-D4 End Drain (Sold Separately) MF-4 Corrugated Pipe Connector (Sold Separately) TR1 has 1 "male" end & 1 "female" end.
PAGE 2
TR1 can be cut and portions combined with full lengths used to form specific lengths. OR Cut portions can be used as drains of less than 36" Option 1: Connect male end of cut piece to female end of full piece. Using Gender Changer's Use GCF & GCM to change the end of the TR1 to accommodate various end to end configurations. Option 2 & 3: Connect "male" end GCF Gender Changer "Female" of cut piece to "female" end of full piece. - ORConnect "female" end of cut piece to "male" end of full piece.