Manual

3. Working on the driver side, remove the sway bar endlink
from the sway bar and axle location. Save the hardware and
endlink. Repeat procedure on the passenger side
4. Working on the driver side, remove the brake line bracket
from OE loca-
tion. Save the
hardware.
Repeat pro-
cedure on the
passenger
side.
5. Place a pair of hydraulic floor jacks under the front axle
and carefully raise up until they make contact with the front
axle. Working on the driver side, remove the OE hardware
that connects the track bar to the OE location. Save the OE
hardware.
6. Working on the driver side, remove the lower control arm
from the frame and axle mount. Save the hardware. The
control arm may be discarded. Repeat procedure on the
passenger side.