Owner manual

Hardware bag 55907NB includes:
Description
Quantity
1/2” unitorque nuts 4
1/2” USS flat washers 2
1/2” x 1 1/2” bolts 4
1/4” USS flat washers 12
10 mm fine nuts 4
10 mm flat washers 8
10 mm lock washers 8
10 mm x 25 mm fine bolts 4
3/4” unitorque nuts 4
3/4” flat washers 8
3/4” x 5 1/2” bolts 2
3/4” x 5” bolts 2
3/8” lock washers 6
3/8” nylock nuts 6
3/8” unitorque nuts 8
3/8” x 1 1/4” bolts 4
3/8” x 1” bolts 4
5/16” unitorque nuts 6
5/16” USS flat washers 22
5/16” x 1” bolts 4
5/16” x 3/4” bolts 2
7/16” USS flat washers 8
9/16” lock washers 2
9/16” USS flat washers 5
9/16” x 2 1/2” bolts 2
S10107 (over size washers) 4
Hardware bag 55906NB1 includes:
Description
Quantity
PB2408 (poly bushings) 4
S10082 (.875” x .563” x 2.080” sleeves) 2
MO2382 (poly bushings) 2
MO3354 (poly bushings) 2
S10075 (.750” x .625” x 1.275” sleeve) 1
S10076 (.750” X .629” X 2.875” sleeve) 1
S10077 (over size washers) 2
PB8297 (poly bushings) 4
BLR01 (front brake line relocation bracket) 2
SHOCKTIE (shock ties) 2
BLR09 (relocation bracket) 2
ECLIP (rear brake line e-clip) 1
LUBE (poly lube packs) 2
S10137 (rear brake line relocation bracket) 1
S10138 (1/4” x 3/4” self tapping screw) 1
WIRETIE (knuckle ball joint boot tie) 2
COTTER01 (cotter pin) 2
S10140 (9/16” fender washer) 2
Special note: Before installation begins, it is the
customers/installers responsibility to make sure that
all parts are on hand. If any parts are missing, please
feel free to call one of our customer service
representatives @ [phone].
Recommended tools selection;
Cut off wheel
Sawzall
Torque wrench
Standard socket set
Standard wrench set
Metric socket set
Metric wrench set
Tape measure
Hydraulic floor jacks