Installation Guide

Railing
Components:
QTY. Description
1 Top Rail
1 Mid Rail
1
Upper Post
1
Lower Post
2
Base Trims
8
#8 x ¾" Screws
4
Base Trim Fasteners
1
Attach Mid Rail to Posts:
a. Insert the ends of the curved mid rail into the holes of
each post making sure holes in rail align with holes in
post (Fig. 1).
NOTE:
The screw holes on the upper post are oriented
closer to the top of the rail hole, while the screw holes
on the lower post are oriented closer to the bottom
of the rail hole. Upper and Lower posts are marked
underneath mounting plate.
b. Drive #8 x ¾" self-tapping screws into post holes
and through rail holes (one on each side). Do not
tighten completely (Fig. 2). Do for both top and
bottom posts.
Fig. 1
Mid Rail
Post
Screw
Hole
Post Hole
To obtain and review a copy of the warranty please go to: BarretteOutdoorLiving.com/warranty.
You can also contact 1-877-279-4496 or write to Barrette Outdoor Living, 7830 Freeway Circle,
Middleburg Heights, Ohio 44130 to obtain a copy of the warranty.
Fig. 2
Mid RailMid Rail
Post
Top Rail
Mid Rail
Upper
Post
Lower
Post
Base
Trims
Screws
Square
Drive
Drill Bit
Base Trim
Fasteners