Installation Guide

To obtain and review a copy of the warranty please go to: BarretteOutdoorLiving.com/warranty.
You can also contact 1-877-279-4496 or write to Barrette Outdoor Living, 7830 Freeway Circle,
Middleburg Heights, Ohio 44130 to obtain a copy of the warranty.
2
Attach Top Rail With Curved Ends to Posts:
a. Insert the ends of the top rail on top of each post
making sure holes in rail align with holes in post (Fig. 3).
b. Drive #8 x ¾" self-tapping screws into post holes
and through rail holes (one on each side). Do not
tighten completely (Fig. 4). Do for both top and
bottom posts.
Fig. 3
Screw
Hole
Post
Top Rail
Top Rail
Post
Fig. 4
3
Attach Section to Stair:
a. Position your assembled panel on steps to location as
desired (Fig. 5).
b. Connect your post to the stairs. There are two options
to do this:
Option 1 (Concrete or Wood):
Using the four provided holes in the base plates:
• Mark holes through the mounting plates of posts
(upper and lower) onto the mounting surface (Fig. 6)
and follow masonry anchor manufacturer’s installation
instructions for proper drilling technique.
NOTE:
For Concrete, use four (4)
1
⁄4 " x 3
1
⁄4 " zinc plated
masonry screws (sold separately).
For Wood, use four (4)
3
⁄8 " x 5" external hex head
lag screws (sold separately).
(continued on back page)
Fig. 5
Fig. 6
Post
Plate