Installation Guide

2
Attach Top Rail With Curved Ends to Posts:
a. Insert the ends of the top rail on top of each post
making sure holes in rail align with holes in post (Fig. 3).
b.
Drive #8 x ¾" self-tapping screws into post holes
and through rail holes (one on each side). Do not
tighten completely (Fig. 4). Do for both top and
bottom posts.
Fig. 3
Screw
Hole
Post
Top Rail
Top Rail
Post
Fig. 4
3
Attach Section to Stair:
a. Position your assembled panel on steps to location as
desired (Fig. 5).
b. Connect your post to the stairs. There are two options
to do this:
Option 1 (Concrete or Wood):
Using the four provided holes in the base plates:
Mark holes through the mounting plates of posts
(upper and lower) onto the mounting surface (Fig. 6)
and follow masonry anchor manufacturer’s installation
instructions for proper drilling technique.
NOTE:
For Concrete, use four (4)
3
3
3
8
8
" x 4" zinc plated
masonry screws (sold separately).
For Wood, use four (4)
3
3
3
8
8
" x 5" external hex head
lag screws (sold separately).
(continued on back page)
Fig. 5
Fig. 6
Post
Plate
Railing
Components:
QTY. Description
1
Top Rail
1
Mid Rail
1
Upper Post
1
Lower Post
2
Base Trims
8
#8 x ¾
"
Screws
4
Base Trim Fasteners
1
Attach Mid Rail to Posts:
a. Insert the ends of the curved mid rail into the holes of
each post making sure holes in rail align with holes in
post (Fig. 1).
NOTE:
The screw holes on the
upper post
are oriented
closer to the top of the rail hole, while the screw holes
on the
lower post
are oriented closer to the bottom
of the rail hole.
Upper
and
Lower
posts are marked
underneath mounting plate.
b. Drive #8 x ¾" self-tapping screws into post holes
and through rail holes (one on each side). Do not
tighten completely (Fig. 2). Do for both top and
bottom posts.
Fig. 1
Mid Rail
Post
Screw
Hole
Post Hole
To obtain and review a copy of the warranty please go to: BarretteOutdoorLiving.com/warranty.
You can also contact 1-877-279-4496 or write to Barrette Outdoor Living, 7830 Freeway Circle,
Middleburg Heights, Ohio 44130 to obtain a copy of the warranty.
Fig. 2
Mid Rail
Mid Rail
Post
Top Rail
Mid Rail
Upper
Post
Lower
Post
Base
Trims
Screws
Square
Drive
Drill Bit
Base Trim
Fasteners