Instructions / Assembly

10
Remove the 2" spacer blocks (Fig. 7).
Fig. 7
Next, install boards:
a. For vertical style: Install (12) 29
1
⁄
1
⁄
1
2
⁄2⁄
" tall
composite boards into bottom channel
(Fig. 6a); making sure they nest completely into
trim channel piece. Next, install mid-rail (again
making sure it is fully inserted over composite
boards. Insert the next (12) boards over mid-
rail. Lastly, install top rail on top of the boards
and screw all three rails into place.
b. For horizontal style: Install (6) boards*
horizontally into bottom rail (Fig. 6b); making
sure bottom board nests completely into trim
channel piece. Next, install mid-rail (again
making sure it is fully inserted over composite
board. Insert the next (6) boards* over mid-rail.
Lastly, install top rail on top of the boards and
screw all three rails into place.
* Depending on size of the boards (if using
5
3
⁄
3
⁄
3
8
⁄8⁄
" boards for example), the deck boards at
each rail – top, mid, and bottom, will need to
be ripped to 4" wide to make the panel 70"
overall height and have all boards even. Please
make sure to measure and accommodate
accordingly before installing.
Fig. 6b
Fig. 6a
6
7