Instructions / Assembly

9
Attach end post or corner post in position. See
separate post mounting instructions based on
individual situation.
Place 2" spacer blocks to support bottom rail
(Fig. 1).
Insert plastic rail adaptor into top and bottom
rails.
Place bottom rail inside  rst post, resting it on the
2" spacer blocks (Fig. 2). Attach bottom rail using
two
3
⁄
3
⁄
3
4
⁄4⁄
" Hex Head screws (Fig. 3).
Back out the top screw so that the channel is
clean until in ll boards are installed (Fig. 4).
Snap adaptor strips (provided in panel kit) into
post channel (Fig. 5).
Installation For Wood In ll
(Surface mount shown; other options available)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
2"
34
34
1
⁄
⁄
1
⁄
1
4
⁄4⁄
"
Adaptor Strips
3
4
5
6
2
1