Manual

Page 3 of 5 - 9/14/2009 – Rev122006
If the vehicle is not equipped with the air bag switch
22. Attach the front console tray using (4) 6-32 x 5/8” screws (SEE FIGURE 6). Position the tray flush against the shift boot so it
holds the shift boot tightly.
If the vehicle is equipped with a 6 speed manual transmission.
23. Place the front console tray in the cutout. Then sandwich the Original shift boot between the Front Console and the 6 Speed
Shifter Bracket. Fasten everything down with (4) 6-32 x 5/8” screws (SEE FIGURE 7).
24. Check lock operation. The rubber seal will need to be compressed initially and will wear-in with time.