User Manual

Page 1 of 4 - 1/28/20 0 8 – Rev122006

INSTALLATION INSTRUCTIONS

TJ Security Console for Speaker Part #055

Please read and fill out the enclosed warranty registration card to activate your warranty.

SHIPMENT CONTENTS

Console Mounting Bracket

Shipping Package

(6) 5/16” Washers (2) 5/16 Locknuts (2) 10-32x1/2 Screws (2) 10-32 Locknuts (2) #10 Washers

(2) 1/4 x ¾” Self Tapping Screws (1) ¼ x 1 ¾” Self tapping Screw (2) 5/16-18 X 1 ¼” Bolts

(3) 8 x 5/8 Phillips Screws (2) 8 x 1 ¼” Phillips Screws (2) 5/16-18 x ½” Bolts Neoprene seal

PAGE 1
INSTALLATION INSTRUCTIONS TJ Security Console for Speaker Part #055 Please read and fill out the enclosed warranty registration card to activate your warranty.
PAGE 2
Tools Needed (1) ½” wrench or ratchet, socket, and extension (1) ½” wrench (1) 3/8” wrench or ratchet, socket, and extension (1) 5/16” Wrench (1) T-25 Torx Phillips head screwdriver 3/8” drill bit Electric drill Silicone sealant (not necessary but recommended) (1) T-30 Torx (2005 or newer Jeep) (1) 10mm Wrench (2005 or newer Jeep) Installation 1. 2. 3. 4. 5. Please read all instructions before starting installation.
PAGE 3
ATTENTION: FREQUENT LUBRICATION IS NECESSARY ON THE LOCKING SYSTEM The pushbutton lock contains an “O” ring seal to protect the interior from dust and water. If this mechanism is not lubricated regularly it will become difficult to operate and it may not return to its home position preventing the key from operating the lock. If this happens simply pull up on the pushbutton to manually bring it back to its home position. Lubricate the pushbutton with a light lubricant such as silicone spray.
PAGE 4
Page 4 of 4 - 1/28/2008 – Rev122006