Datasheet

10/12
Tufvassons Transformator AB  Märstavägen 20  SE-193 40 Sigtuna  Phone [phone]
Fax [phone]  E-mail [e-mail]  www.tufvassons.se
A company in the ADDTECH group.
Reliable isolation transformers
from Tufvassons
Tufvassons has a wide range of transformers and over fifty years’ experience of
making them ourselves. We offer isolation transformers of the highest quality for
fixed installation, mounting on a DIN rail, as well as movable versions that are
connected with a mains cable. Select products yourself or have our staff guide you
to the right power supply.
Optimum isolation, removes interference
The isolation transformer is used when you need to adapt
one voltage level to another one, or separate a protective
earth from a system earth. It provides optimum isolation,
minimises interference and is simple to install – including
in the USA thanks to its USA-compatible outlet that is
used for 110-volt products. Just like Tufvassons’ other
products, the isolation transformer is CE-marked and also
has short circuit and overload protection.
Type: TEZ 35
Part. no.: 6745-0041
Input voltage: 230V, 50-60 Hz.
Output voltage: 110V
Rated power: 35VA (0,3A)
Weight: 0.6 kg
Encapsulation class: IP30
Insulation class: 4.2 kV
Ambient temperature: max. 40
o
C
Design:  Transformer potted in hard-setting plastic, with grey encapsulation made from impact resistant, self
extinguishing thermoplastics.
- Double insulated (earth connection not required).
- Short circuit and overload protection with thermo protection.
- Primary mains cable with European mains plug.
- Fully enclosed secondary 2-pole American outlet.
Mounting: Install in any position.
Manufacturing standard: Security: EN 61558-1; EN 61558-2-4
Emissions: EN 61 000-6-3; EN 61 000-6-4, IEC 62041
Immunity: EN 61 000-6-1; EN 61 000-6-2, IEC 62041
Other information: If the mains cable or plug is damaged, the transformer must be destroyed/recycled.