BTE-Dion User guide Hear the love Please read this manual carefully before use and keep it for future use
Welcome page Thank you for choosing Shenzhen Zhiting Technology Co., ltd to develop the back-of-ear hearing aid — Dion. Please read the User Guide carefully to ensure that you understand and get the best out of hearing aids to avoid damage to your hearing aid due to improper operation. From now on, we will be deeply concerned about your hearing condition, you will enjoy the wonderful experience of a hearing aid brought to you, letting you hear every character, with real ears.
Suggestions: A favourable audiologist is an essential part of a healthy life. When hearing loss occurs, you need to go to a special testing center or hospital for a hearing test and evaluation. If necessary, please share your expectations with the surveyor or doctor. Consistent and scientific use of hearing aids will help you to listen better.
Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
About Hearing aids Hearing aid models Battery Size Dion P13 Charging Allow NOT Allow Serial number (left side): ________________________________ Serial number (right side): _______________________________ Warranty period: ______________________________________ Purchase date: _____________________________________ - 04 -
Cautions Certain users should only use their hearing aids and not others. Hearing aid earplugs can be cleaned daily with a soft dry cloth to remove cerumen, if necessary, they can be removed, sterilized with alcohol, and then put back into hearing aids until the alcohol is completely volatile. Exposure to high temperatures, strong humidity, high magnetic fields(0.
Hearing aids should be tested before professional examination and hearing test, and under the guidance of a doctor or a professional hearing aid tester. Hearing aids do not cure hearing loss, or prevent or improve hearing loss caused by organic lesions. Please follow the instructions of your doctor or hearing health care professional to use hearing aids. Do not take it privately if any parts are left in the ear canal after removing the hearing aid.
Be especially careful when wearing custom hearing aids with an output greater than 132 decibels, as high-intensity sound output signals may cause residual hearing damage. Please ask hearing healthcare professionals to advise the use of hearing aids or carefully adjust the volume to ensure that the hearing aids maximize the hearing loss appropriate for your specific situation. Your hearing aid is suitable for operation in the frequency range of 2.4 to 2.8GHz.
Precautions for the use of hearing aid batteries: 1. Do not throw the battery into the fire to avoid explosion; 2. Do not put the battery in your mouth. Swallowing the battery could endanger your life. If you swallow the battery, seek medical attention immediately. 3. Children and people with intellectual disabilities should keep away from batteries. 4. Do not discard the used battery at will. Please hand it to the department specialized in recycling used batteries. 5.
Hearing aids should be kept clean and wax removed from earplugs frequently Hearing aids should be regularly sent to the testing center for maintenance and inspection, to ensure that the hearing aid is in good condition. Use earplugs with caution if the patient has a perforated eardrum, exposed middle ear cavity, or has had ear canal surgery.
To avoid drool, please handle your hearing aid with care and prevent it from falling on the parrot to a avoid strong impact or impact on the hearing aid. Hearing aids are composed of sophisticated acoustic components; especially the receiver is easily damaged by vibration, which will shorten the service life of the original according to the damage, and severe vibration will cause damage to the hearing aid. Hearing aids are strictly prohibited from entering the water.
Descriptions Device model: Dion Product Component Description for Dion ① Earplug ② Tube ③ Microphone ④ Multi-function button ⑤ Battery door ⑥ Speaker dummy - 11 -
- 12 -
Using guide Before using: Please open the battery compartment and check whether the serial number on the battery compartment matches the outer packing box - 13 -
Step 1: Put in the battery Remove the sticky paper from the new battery and wait 1 minute until the battery is fully activated; Open the battery door - 14 - Place the battery’s positive electrode (+) ,face-up, into the battery compartment.
Step 2: Wearing hearing aid Hang the heraing aid behind your ear Put the earplugs into the ear canal - 15 -
Step 3 Removing hearing aid Grasp the hearing aid tube and carefully remove the hearing aid from the ear.
Care and maintenance If a hearing aid has a buildup of earwax, dirt, and bacteria; it can lead to ear infections; dirt, earwax plugs the hearing aid holes, and the hearing aid is silent, so please do the followings: 1. Do not wear hearing aids when spraying hairspray, to avoid stuffing into the sound hole; 2. Do not bring hearing AIDS into the therapy room if you do microwave therapy in the hospital; 3. Sweat should be prevented from entering the hearing aid in summer 4.
6. Hearing aids must be kept dry, especially in the season of rain and humidity, to avoid the rain. 7. Hearing aids are kept in an airtight desiccant container to prevent moisture absorption. The desiccant will have Arthur changes, and it needs to be used after drying or replaced in time.
Troubleshooting Problem Causes What to do Not boot(after close battery door) Install sufficient batteies and fill the battert compartment Low battery Install sufficient batteies and fill the battert compartment The batterydoor is not fully closed Completely close the battery door Speakre blockage Cleaning speaker Improper wearing of earplugs Wearing earplugd correctly The ear fill dirty Clean ear plugs Speakre dirty Clean speaker Too many cerumen in ear canal Clean ear canal and seek medic
Problem SQUEAL DIST ORTION OF SOUND Causes What to do Improper wearing of earplugs Wearing corrrctly Too many cerumen in ear canal Clean ear canal and seek medical advice if necessary Improper setting of hearing aids Reset according to the manual prompts Low battery Inst all sufficient batteries and fill the battery compartment Wearing wrong earplugs Replace earplugs Improper setting of hearing aids Reset according to the manual prompts Hearing aid failure Find the purchase platform and ap
Service and Warranty Local warranty Please check the hearing care professional from which you purchased your hearing aids for the local warranty terms International warranty TUITUI hearing aid offers a one-year limited international warranty, effective from the date of purchase. This limited warranty covers manufacturing and material defects in the hearing aid itself, but excludes accessories such as batteries, tubes, earpieces, external receivers. Warranty is valid on presentation of proof of purchase.
Warranty limitation This warranty does not cover damage from improper handling or care, exposure to chemicals or undue stress. Damage caused by third parties or non-authorized service centers renders the warranty null and void. This warranty does not include any services performed by a hearing care professional in their office.
Compliance information Product structure and composition: The rechargeable behind-the-ear hearing aid consists of a shell, a microphone, a signal processor, a receiver and an earplug. Operating principle: Hearing aids are essentially sound amplifiers; the sound is amplified in some way, and it is some way that people with hearing loss can effectively use themselves to participate in the hearing.
the special testing and debugging software,to set according to the user's empathy for the hearing aid, save the setting value in the memory, and save some parameters and program segments that control the working mode of the DSO. Product intended use: After the test, it is provided to the patients with hearing loss compensation. Contraindication: Dion series products are not recommended for people with acute otitis externa, tympanitis, chronic suppurative otitis media, and acute suppurative otitis media.
Electromagnetic compatibility Specification: In accordance with GB/T 25102.13-2010 "electroacoustic hearing aids - Part 13: Electromagnetic Compatibility (EMC)" adjacent compatibility requirements. Neighbor comp atibility At the following field strength,IRIL=55dB The field strength is expressed in terms of V/m(*) GHz Microphone mode *Note: The test field strengths given are unmodulated carrier values.
Transportation and storage: Ambient temperature range: -10℃~40℃ Relative temperature range： ≤80% Atmospheric pressure： 86kPa ~ 106kPa Normal operating conditions: Environment temperature:-10℃~40℃ Relative humidity: ≤80% Atmospheric pressure： 86kPa ~ 106kPa - 26 -
A special note on howlers: One of the most common problems that new users of hearing aids encounter for the first time is "squealing", which is, hearing aids emit loud noises, especially when the volume is turned on higher, The noise comes from the earplugs that are not completely plugged, and the ear canal cannot be closed. The hearing aid amplifies the Leakage sound, which is then amplified by the hearing aid to generate noise. Technical description: 1.
d) According to the degree of safety in the presence of flammable anesthetic gas mixed with air or with oxygen or nitrogen oxide: Equipment not to be used in the presence of a flammable mixture of anesthetic gas and air or a mixture of oxygen or nitrogen oxide e) According to the operation mode: continuous operation 2. External link device If the mains power the external equipment connected to the product, it must comply with GB9706.1-2007 or equivalent safety standards.
Technical specification: OSPL90 Model Dion Maximumum saturated sound pressure level (dB) High frequency mean (dB) ≤125+3 122±4 Full range sound gain (mean at high frequ ency ) ≤57±5 Equivalent input noise (dB) ≤23±3 Total harmonic distortion 500Hz ≤4+3 ≤4+3 ≤4+3 Frequency response range (Hz) Floor level ≤200 Upper limit ≥6200 Software Version Description: Model Dion Software version number 4.2.
Information and description of symbols This symbol indicates that it is important for the user to read and consider the relevant information in this user guide. This symbol indicates that it is important for the user to pay attention to the relevant warning notices in these user guides. The symbol with the crossed-out garbage bin is to remind you that this CROS device and the charger may not be disposed of as regular household waste.
Humidity during transportation: Up to 80% (non condensing).Humidity during storage: 0% to 80%, if not in use. Atmospheric pressure during transportation and storage: 86kPa to 106kPa Keep dry during transport. This symbol indicates that the products described in these user instructions comply with the requirements of the Category B application part of EN 60601-1.Hearing aid surfaces are designated as Class B Applied Parts.
Packing list - 32 -
Contents Name of registrant/manufacturer: Shenzhen Zhiting Technology Co., Ltd Domicile of registered person/manufacturer: 516, Building 4, Qidi Xiexin Science Park, Longcheng Street, Longgang District, Shenzhen, Guangdong, China Contact information of the registrant/manufacturer: E-mail： sz@eartech.
Hear the love Shenzhen Zhiting Technology Co.
FCC Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
