SDS

Page 2 of 4
iLoveToCreate SDS - 4520– Fabric Markers Issuing Date: March 31, 2015
Protection of Firefighters:
Specific hazards arising from
the Chemical:
No Particular hazards.
Protectice equipment and
Precations for firefighters:
Use standard firefighting procedures and consider the hazards of other
involved materials.
Special protective equipment for
Fire Fighters:
Wear full protective clothing, including helmet, self-containted positive
pressure or pressure demand breathing apparatus, protective clothing and
face mask.
Specific Methods
No specific methods suggested.
Harzardous combustion
products:
Carbon monoxide and carbon dioxide.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Extinguish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate.
Avoid inhalation of vapors and contact with skin and eyes. Wear suitable
protective clothing. See Section 8 of the SDS for Personal Protective Equipment.
Environmental Precautions:
Do not allow to enter drains, sewers, or water course.
Method for Cleaning Up:
Clean up in accordance with all applicable regulations. Remove source of iginition.
Absorb spillage with non-combustible, absorbent material. Containers with
collected spillage must be properly labeled with correct contents and hazard
symbol.
7. HANDLING AND STORAGE
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse.
Avoid contact with eyes. Avoid ingestion and inhalation.
Packaging Material:
No information found.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION
Exposution Limit Values:
Not applicable.
Meausrement Methods:
Not available.
Technical Meausres:
Not necessary, no exposition expected.
Personal Protective Equipment:
Body Protection:
Common special body protection not necessary, regular work clothing sufficient.
Respiratory Protection:
Common respiratory protection not necessary.
Eye Protection:
Common eye protection not necessary, eye contacts should be avoided.
Hand Protection:
Protective gloves are not required commonly, on permanent skin contact gloves for
low mechanic and substantial stress are enough. Protective gloves recommended
are Matter:Butyl Rubber Thickness: >0,4mm Penetration Time : >30 Min.
Skin Protection:
Skin protection products are not as effective as protective gloves, so suitable
protective gloves are preferred if possible.
General Safety and
Hygeiene Measures:
On using do not eat, drink, or smoke. Avoid aspiration of dust. Change contaminated
clothes and don’t reuse it until cleaned.
Further Information:
This product is classified as non-hazardous. However, the usual precautions for
harmful chemicals must be observed to avoid contact with the skin, eyes, and
respiratory tract.